D-Link AC1200 User Manual page 61

Section 4 - Configuration
All Settings
Connection Type: Select your connection type from drop-down menu:
For Dynamic IPv4 refer to page 24.
For Static IPv4 refer to page 27
For Dynamic IPv6 refer to page 31
For Static IPv6 refer to page 35
For PPPoE refer to page 38
For PPPoE IPv6 refer to page 42
For PPPoE Dual Stack refer to page 47
For PPTP refer to page 52
For L2TP refer to page 56
Note: this option can only be edited in the WAN/Creating mode.
Enable Toggle this switch to enable the connection. This is enabled by default.
Connection:
Disabling this feature may disable your Internet connection.
PPP
Without
Enable this setting to connect without a username and password.
authorization:
This configuration is uncommon and is disabled by default.
Username: If Without authorization is disabled, specify the PPP username
provided by your ISP.
Password: If Without authorization is disabled, specify the PPP password
provided by your ISP.
VPN Server
Specify the VPN server address provided by your ISP.
address:
D-Link DIR-1210 User Manual
L2TP (cont)
57