Page 1: User Manual

Version 1.01 | 11/04/2016 User Manual Wireless AC750 Dual Band Router DIR-819...
Page 2: Manual Revisions

Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision Date Description 28 October, 2016 Initial release for revision A1 Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries.
Page 3: Table Of Contents

Wireless Connection Setup Wizard......44 Admin .................. 103 Add Wireless Device with WPS ........47 Time ..................104 Manual Wireless Connection Setup ......50 Syslog ................... 105 Wireless Security Mode ..........52 System ................. 106 Network Settings ..............54 Firmware ................107 IPv6 ..................57 D-Link DIR-819 User Manual...
Page 4

Windows® 8 ................125 WPA/WPA2 ................. 125 Windows® 7 ................127 WPA/WPA2 ................. 127 WPS ..................129 Windows Vista® ................. 133 WPA/WPA2 ................. 134 Troubleshooting ............136 Wireless Basics ...............140 What is Wireless? ..............141 Tips ....................143 D-Link DIR-819 User Manual...
Page 5: Package Contents

Section 1 - Product Overview Package Contents DIR-819 Wireless AC750 Dual Band Router Power Adapter Ethernet Cable Wi-Fi Configuration Card Quick Install Guide If any of the above items are missing, please contact your reseller. Note: Using a power supply with a different voltage rating than the one included with the DIR-819 will cause damage and void the warranty for this product.
Page 6: System Requirements

Utility Requirements • Firefox 20 or higher • Safari 5.1 or higher • Chrome 25 or higher Windows Users: Make sure you have the latest version of Java installed. ® Visit www.java.com to download the latest version. D-Link DIR-819 User Manual...
Page 7: Introduction

The DIR-819 is full of features to improve your home network. The rich parental controls allow you to easily control when the Internet should be available in your home and what content is allowed. With all this and more, the DIR-819 Wireless AC750 Dual Band Router will serve your network well for years to come.
Page 8: Features

Maximum wireless signal rate derived from IEEE Standard 802.11a, 802.11g, 802.11n and 802.11ac specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range. D-Link DIR-819 User Manual...
Page 9: Hardware Overview

The Wireless LED indicates that this wireless band is working. It blinks during wireless data transmission. Internet The Internet LED indicates that an Internet link is established. It blinks during data transmission. The WPS LED blinks during the WPS pairing process. D-Link DIR-819 User Manual...
Page 10: Connections

Press to start the WPS process and automatically create a secure connection to a WPS client. Internet Port Using an Ethernet cable, connect your broadband modem to this port. LAN Ports (1-4) Connect Ethernet devices such as computers, switches, storage (NAS) devices and game consoles. D-Link DIR-819 User Manual...
Page 11: Installation

• If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as WinPoET, BroadJump, or EnterNet 300 from your computer or you will not be able to connect to the Internet. D-Link DIR-819 User Manual...
Page 12: Wireless Installation Considerations

The key to maximizing wireless range is to follow these basic guidelines: 1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum - each wall or ceiling can reduce your adapter’s range from 1 to 30 meters (3 to 90 feet). Position your devices so that the number of walls or ceilings is minimized.
Page 13: Hardware Setup

3. Turn off and unplug the power and Ethernet cable to your cable or DSL broadband modem. This is required. In some cases, you may need to turn it off for up to five minutes. DIR-819 Modem D-Link DIR-819 User Manual...
Page 14

6. Connect the supplied power adapter to the router and a power outlet, press the power button, and verify that the power LED is lit. Allow 1 minute for the router to boot up. Modem DIR-819 RESET POWER POWER PORT INTERNET D-Link DIR-819 User Manual...
Page 15

8. If you are connecting to a broadband service that uses a dynamic connection (not PPPoE), you may be online already. Try opening a web browser and connecting to a website. If the website does not load, proceed to Completing Setup on page 12. D-Link DIR-819 User Manual...
Page 16: Completing Setup

There are several different ways you can configure your router to connect to the Internet and connect to your clients: • D-Link Setup Wizard - This wizard will launch when you log into the router for the first time, refer to Setup Wizard on page 13.
Page 17: Setup Wizard

WELCOME TO THE D-LINK SETUP WIZARD WELCOME TO THE D-LINK SETUP WIZARD This wizard will guide you through a step-by-step process to configure your new D-Link router and connect to the Internet. The wizard is designed to guide you through a step-by-step process to configure your new •...
Page 18

For Username / Password Connection (PPTP) setup help refer to page 15. Cancel Prev Next For Username / Password Connection (L2TP) setup help refer to page 16. For Static IP Address Connection setup help refer to page 18. Select your connection type and click Next to continue. D-Link DIR-819 User Manual...
Page 19

Cancel Prev Next Address: If you choose Dynamic IP or Static IP as the Address Mode, enter your PPTP Server IP address: PPTP Server IP Enter the PPTP Server IP address provided by your ISP. Address: D-Link DIR-819 User Manual...
Page 20

Enter the L2TP Subnet Mask provided by your ISP. Verify Password : DNS SETTINGS Mask: Primary DNS Address : Secondary DNS Address : (optional) L2TP Gateway IP Enter the L2TP Gateway IP Address provided by your ISP. Cancel Prev Next Address: D-Link DIR-819 User Manual...
Page 21

DNS SETTINGS Primary DNS Enter the primary DNS server IP addresses. Server: Secondary DNS Enter the secondary DNS server IP addresses. Server: Click Next and proceed to Step 2 - Configure Your Wi-Fi Security on page 19. D-Link DIR-819 User Manual...
Page 22

DNS SETTINGS Primary DNS Enter the primary DNS server IP addresses. Server: Secondary DNS Enter the secondary DNS server IP addresses. Server: Click Next and proceed to Step 2 - Configure Your Wi-Fi Security on page 19. D-Link DIR-819 User Manual...
Page 23

STEP 3: SET YOUR PASSWORD STEP 3: SET YOUR PASSWORD By default, your new D-Link Router does not have a password configured for administrator access to the Web-based configuration pages. To secure your new networking device, please set and verify a password below: Enter a new administration password.
Page 24

Wi-Fi Network Name(SSID) 5GHz : Your_5GHz_Network Wi-Fi Password A_Str0ng_P@ssWord! Cancel Prev Next Congratulations, your device has been successfully configured. The router will reboot and LOGIN Login to the router : display the login page. User Name : Admin Password : Login D-Link DIR-819 User Manual...
Page 25: Configuration

NETWORK SETTINGS INTERNET CONNECTION SETUP WIZARD IPV6 If you would like to utilize our easy to use Web-based Wizard to assist you in connecting your new D-Link Systems Router to the Internet, click on the button below. Internet Connection Setup Wizard Note:Before launching the wizard, please make sure you have followed all steps outlined in the Quick Installation Guide included in the package.
Page 26: Web Ui Table Of Contents

WI-FI PROTECTED SETUP ADVANCED NETWORK GUEST ZONE IPV6 FIREWALL IPV6 ROUTING DIR-819 SETUP To return to this Web UI Table of Contents page, simply click the D-Link logo on the top INTERNET INTERNET CONNECTION right of each page. D-Link DIR-819 User Manual...
Page 27: Setup

NETWORK SETTINGS INTERNET CONNECTION SETUP WIZARD IPV6 If you would like to utilize our easy to use Web-based Wizard to assist you in connecting your new D-Link Systems Router to the Internet, click on the button below. Internet Connection Setup Wizard Note:Before launching the wizard, please make sure you have followed all steps outlined in the Quick Installation Guide included in the package.
Page 28: Internet

If you wish to modify or configure the device settings manually, click the Manual Internet Connection Setup. INTERNET CONNECTION SETUP WIZARD If you would like to utilize our easy to use Web-based Wizard to assist you in connecting your new D-Link Systems Router to the Internet, click on the button below. MANUAL INTERNET CONNECTION OPTION...
Page 29: Internet Connection Setup Wizard

This Internet Connection Setup Wizard will guide you through a step-by-step process to WELCOME TO THE D-LINK INTERNET CONNECTION SETUP WIZARD This wizard will guide you through a step-by-step process to configure your new D-Link router and connect to the configure your new D-Link router and connect to the Internet.
Page 30

DHCP CONNECTION (DYNAMIC IP ADDRESS) To set up this connection, please make sure that you are connected to the D-Link Router with the PC that was originally connected to your broadband connection. If you are, then click the Clone MAC button to copy your computer’s MAC Address to the D-Link Router.
Page 31

Next Cancel Connect Click Next to continue. SETUP COMPLETE! SETUP COMPLETE! The Internet Connection Setup Wizard has completed. Click the Connect button to save your settings. Click Connect to finish the setup. Prev Next Cancel Connect D-Link DIR-819 User Manual...
Page 32

Enter the username provided by your ISP. Password: Enter the password provided by your ISP. Verify Password: Enter the password provided by your ISP one more time. DNS SETTINGS Primary DNS Enter the primary DNS server IP addresses. Server: D-Link DIR-819 User Manual...
Page 33

Next Cancel Connect Click Next to continue. SETUP COMPLETE! SETUP COMPLETE! The Internet Connection Setup Wizard has completed. Click the Connect button to save your settings. Click Connect to finish the setup. Prev Next Cancel Connect D-Link DIR-819 User Manual...
Page 34

Enter the username provided by your ISP. Password: Enter the password provided by your ISP. Verify Password: Enter the password provided by your ISP one more time. DNS SETTINGS Primary DNS Enter the primary DNS server IP addresses. Server: D-Link DIR-819 User Manual...
Page 35

Next Cancel Connect Click Next to continue. SETUP COMPLETE! SETUP COMPLETE! The Internet Connection Setup Wizard has completed. Click the Connect button to save your settings. Click Connect to finish the setup. Prev Next Cancel Connect D-Link DIR-819 User Manual...
Page 36

Enter the secondary DNS server IP addresses. Server : Click Next to continue. SETUP COMPLETE! SETUP COMPLETE! The Internet Connection Setup Wizard has completed. Click the Connect button to save your settings. Click Connect to finish the setup. Prev Next Cancel Connect D-Link DIR-819 User Manual...
Page 37: Manual Internet Connection Setup

For PPPoE (Username / Password) setup help refer to page 36. For PPTP (Username / Password) setup help refer to page 38. For L2TP (Username / Password) setup help refer to page 40. For DS-Lite setup help refer to page 42. D-Link DIR-819 User Manual...
Page 38

1500 it manually or click Clone Your PC’s MAC Address. MAC Address : Clone Your PC’s MAC Address When you have finished configuring your Internet connection, click the Save Settings Save Settings Don’t Save Settings button. D-Link DIR-819 User Manual...
Page 39

1500 it manually or click Clone Your PC’s MAC Address. MAC Address : Clone Your PC’s MAC Address When you have finished configuring your Internet connection, click the Save Settings Save Settings Don’t Save Settings button. D-Link DIR-819 User Manual...
Page 40

DNS Mode: Select either Receive DNS from ISP or Enter DNS Manually. If you choose Enter DNS Manually as the DNS Mode, enter your DNS information: Primary DNS Enter the primary DNS server IP addresses. Server: D-Link DIR-819 User Manual...
Page 41

DNS Mode : ž Receive DNS from ISP š Enter DNS Manually Primary DNS Server : Secondary DNS Server : (optional) MTU : 1492 MAC Address : Clone Your PC’s MAC Address Save Settings Don’t Save Settings D-Link DIR-819 User Manual...
Page 42

Select either AlwaysOn, On Demand, or Manual. You may create a schedule by clicking New Schedule. Refer to Schedules on page 110 for more information. If you choose Manual as the Reconnect Mode, enter the Maximum Idle Time: D-Link DIR-819 User Manual...
Page 43

New Schedule š On Demand š Manual Maximum Idle Time : (minutes) Primary DNS Server : Secondary DNS Server : (optional) MTU : 1492 MAC Address : Clone Your PC’s MAC Address Save Settings Don’t Save Settings D-Link DIR-819 User Manual...
Page 44

Select either AlwaysOn, On Demand, or Manual. You may create a schedule by clicking New Schedule. Refer to Schedules on page 110 for more information. If you choose Manual as the Reconnect Mode, enter the Maximum Idle Time: D-Link DIR-819 User Manual...
Page 45

New Schedule š On Demand š Manual Maximum Idle Time : (minutes) Primary DNS Server : Secondary DNS Server : (optional) MTU : 1492 MAC Address : Clone Your PC’s MAC Address Save Settings Don’t Save Settings D-Link DIR-819 User Manual...
Page 46

IPv6 WAN Default Gateway : IPv6 WAN Default Your WAN IPv6 default gateway address is listed here. Save Settings Don’t Save Settings Gateway: When you have finished configuring your Internet connection, click the Save Settings button. D-Link DIR-819 User Manual...
Page 47: Wireless Settings

If your wireless network is already set up with Wi-Fi Protected Setup, manual configuration of the wireless network will destroy the MANUAL WIRELESS CONNECTION SETUP existing wireless network. If you would like to configure the wireless settings of your new D-Link Systems Router manually, then click on the Manual Wireless Network Setup button below.
Page 48: Wireless Connection Setup Wizard

Wireless Connection Setup Wizard This section describes the Wireless Connection Setup Wizard. STEP 1: WELCOME TO THE D-LINK WIRELESS SECURITY SETUP WIZARD STEP 1: WELCOME TO THE D-LINK WIRELESS SECURITY SETUP WIZARD Give your network a name, using up to 32 characters.
Page 49

A_Str0ng_P@ssWord! Security Password: Note: You will need to enter the same password as keys in this step into your wireless clients in order to enable proper wireless communication. Click Next to continue. Prev Next Cancel Save D-Link DIR-819 User Manual...
Page 50

Pre-Shared Key : A_Str0ng_P@ssWord! Wireless Band : 5GHz Band Wireless Network Name (SSID) : Your_5GHz_Network Security Mode : Auto (WPA or WPA2) - Personal Cipher Type: TKIP and AES Pre-Shared Key : A_Str0ng_P@ssWord! Prev Next Cancel Save D-Link DIR-819 User Manual...
Page 51: Add Wireless Device With Wps

‘virtual’ WPS button. Prev Next Cancel Connect Manual: Choose this option to see the currently configured wireless networking settings to enter on your wireless client. Choose your configuration type and refer to the following pages. D-Link DIR-819 User Manual...
Page 52

If your device could not be found, this screen is displayed. You may click Cancel and retry STEP 2: CONNECT YOUR WIRELESS DEVICE Adding wireless device: Session Time-Out. running the wizard again. Prev Next Cancel Save D-Link DIR-819 User Manual...
Page 53

2.4 Ghz Frequency SSID: Your_2.4GHz_Network Security Mode: WPA2-PSK Cipher Type: AES -PIN (Personal Identification Number) Pre-shared Key: adc058dce7893caf98ca91 5 Ghz Frequency SSID: Your_5GHz_Network Security Mode: None Prev Next Cancel Wireless Status D-Link DIR-819 User Manual...
Page 54: Manual Wireless Connection Setup

Wireless Band: 2.4 GHz or 5 GHz Use this section to configure the wireless settings for your D-Link router. Please note that changes made in this section may also need to be duplicated on your wireless client. To protect your privacy you can configure wireless security features. Securing your wireless network is important as it is used to protect the integrity of the information being transmitted.
Page 55

Visibility Status : ž Visible š Invisible WIRELESS SECURITY MODE WIRELESS SECURITY MODE Security Mode : None ▼ Refer to Wireless Security Mode on page 52 for more information on configuring your WPA-Personal WPA-Enterprise wireless network’s security. D-Link DIR-819 User Manual...
Page 56: Wireless Security Mode

WEP Key 1 : are 64 bit (10 hex digits) or 128 bit (26 hex digits). Authentication: Select either Both or Shared Key. WEP Key 1: Enter a wireless key to use on your wireless network. D-Link DIR-819 User Manual...
Page 57

Enter a wireless key to use on your wireless network. RADIUS server Port: RADIUS server Shared Secret: Address: RADIUS server Port: Enter your RADIUS server’s port number. RADIUS server Enter your RADIUS server’s shared secret. Shared Secret: D-Link DIR-819 User Manual...
Page 58: Network Settings

Note: If you statically (manually) assign IP addresses to your computers Save Settings Don’t Save Settings or devices, make sure the IP addresses are outside of this range or you may have an IP conflict. D-Link DIR-819 User Manual...
Page 59

Enable Host Name IP Address The currently defined DHCP Reservations are listed here. Enable: Enable or disable this DHCP Reservation rule. Host Name: The host name for this rule. IP Address: The DHCP IP address reservation. D-Link DIR-819 User Manual...
Page 60

This section displays all of the currently connected DHCP cclients. The Host Name, IP address, Save Settings Don’t Save Settings MAC Address, and expiration time of each client is displayed in the table. Click Save Settings when you are finished. D-Link DIR-819 User Manual...
Page 61: Ipv6

IPV6 INTERNET CONNECTION SETUP WIZARD If you would like to utilize our easy to use Web-based Wizard to assist you in connecting your new D-Link Systems Router to the IPv6 Internet, click on the button below.
Page 62: Ipv6 Internet Connection Setup Wizard

WELCOME TO THE D-LINK IPV6 INTERNET CONNECTION SETUP WIZARD This wizard will guide you through a step-by-step process to configure your new D-Link router and connect to the IPv6 connection which uses PPPoE, Static IP, or 6rd. Click Next to begin.
Page 63: Ipv6 Over Pppoe

Click Next to continue. SETUP COMPLETE! SETUP COMPLETE! The IPv6 Internet Connection Setup Wizard has completed. Click the Connect button to save your settings and reboot the router. Click Connect to finish the setup. Prev Next Cancel Connect D-Link DIR-819 User Manual...
Page 64

Click Next to continue. SETUP COMPLETE! SETUP COMPLETE! The IPv6 Internet Connection Setup Wizard has completed. Click the Connect button to save your settings and reboot the router. Click Connect to finish the setup. Prev Next Cancel Connect D-Link DIR-819 User Manual...
Page 65

Click Next to continue. SETUP COMPLETE! SETUP COMPLETE! The IPv6 Internet Connection Setup Wizard has completed. Click the Connect button to save your settings and reboot the router. Click Connect to finish the setup. Prev Next Cancel Connect D-Link DIR-819 User Manual...
Page 66: Ipv6 Local Connectivity Settings

Don’t Save Settings Current ULA The current ULA Prefix is displayed here. Prefix: LAN IPv6 ULA: The current LAN IPv6 ULA is displayed here. When you have finished configuring your IPv6 connection, click the Save Settings button. D-Link DIR-819 User Manual...
Page 67: Manual Ipv6 Internet Connection Setup

For IPv6 in an IPv4 Tunnel refer to page 71. For 6to4 refer to page 74. For 6rd refer to page 76. For Local Connectivity Only refer to page 78. When you have finished configuring your IPv6 connection, click the Save Settings button. D-Link DIR-819 User Manual...
Page 68: Static Ipv6

LAN IPv6 Address Settings Stateful DHCPv6 Router Advertisement Lifetime : (minutes) LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router. Save Settings Don’t Save Settings LAN IPv6 Link- Displays the router’s LAN link-local address. Local Address: D-Link DIR-819 User Manual...
Page 69

IPv6 Address Enter the ending IPv6 address for the DHCP server’s IPv6 assignment. Range(End): Router Enter the IPv6 address lifetime (in seconds). Advertisement Lifetime: When you have finished configuring your IPv6 connection, click the Save Settings button. D-Link DIR-819 User Manual...
Page 70

LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router. SLAAC+Stateless DHCP Stateful DHCPv6 Router Advertisement Lifetime : (minutes) LAN IPv6 Link- Displays the router’s LAN link-local address. Save Settings Don’t Save Settings Local Address: D-Link DIR-819 User Manual...
Page 71

Enter the ending IPv6 address for the DHCP server’s IPv6 assignment. Range(End): Router The currently defined router advertisement lifetime is displayed. Advertisement Lifetime: When you have finished configuring your IPv6 connection, click the Save Settings button. D-Link DIR-819 User Manual...
Page 72

LAN. MTU Size: Enter the MTU size. ☑ Enable Automatic IPv6 address assignment : ☑ Enable Automatic DHCP-PD in LAN : Autoconfiguration Type : SLAAC+RDNSS ▼ SLAAC+Stateless DHCP Stateful DHCPv6 Router Advertisement Lifetime : (minutes) D-Link DIR-819 User Manual...
Page 73

If you chose Static IP as the Address Mode, or disabled DHCP-PD, enter your LAN IPv6 Address: LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router. LAN IPv6 Link- Displays the router’s LAN link-local address. Local Address: D-Link DIR-819 User Manual...
Page 74

IPv6 Address Range (End) : Range(End): Router Advertisement LIfetime : (minutes) Save Settings Don’t Save Settings Router The currently defined router advertisement lifetime is displayed. Advertisement Lifetime: When you have finished configuring your IPv6 connection, click the Save Settings button. D-Link DIR-819 User Manual...
Page 75

LAN. ☑ Enable Automatic IPv6 address assignment : ☑ Enable Automatic DHCP-PD in LAN : Autoconfiguration Type : SLAAC+RDNSS ▼ SLAAC+Stateless DHCP Stateful DHCPv6 Router Advertisement Lifetime : (minutes) D-Link DIR-819 User Manual...
Page 76

Check this box to enable DHCP-PD. Save Settings Don’t Save Settings LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router. Not available if DHCP-PD is enabled. LAN IPv6 Link- Displays the router’s LAN link-local address. Local Address: D-Link DIR-819 User Manual...
Page 77

IPv6 Address Range (End) : Range(End): Router Advertisement LIfetime : (minutes) Save Settings Don’t Save Settings Router The currently defined router advertisement lifetime is displayed. Advertisement Lifetime: When you have finished configuring your IPv6 connection, click the Save Settings button. D-Link DIR-819 User Manual...
Page 78

SLAAC+Stateless DHCP Stateful DHCPv6 LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router. Router Advertisement Lifetime : (minutes) Save Settings Don’t Save Settings LAN IPv6 Link- Displays the router’s LAN link-local address. Local Address: D-Link DIR-819 User Manual...
Page 79

IPv6 Address Enter the ending IPv6 address for the DHCP server’s IPv6 assignment. Range(End): Router Enter the IPv6 address lifetime (in seconds). Advertisement Lifetime: When you have finished configuring your IPv6 connection, click the Save Settings button. D-Link DIR-819 User Manual...
Page 80

Stateful DHCPv6 Router Advertisement Lifetime : (minutes) Secondary DNS Enter the secondary DNS server address. Save Settings Don’t Save Settings Address: LAN IPV6 ADDRESS SETTINGS LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router. D-Link DIR-819 User Manual...
Page 81

IPv6 Address Enter the ending IPv6 address for the DHCP server’s IPv6 assignment. Range(End): Router Enter the IPv6 address lifetime (in seconds). Advertisement Lifetime: When you have finished configuring your IPv6 connection, click the Save Settings button. D-Link DIR-819 User Manual...
Page 82: Local Connectivity Only

Use this section to configure the internal network settings of your router. LAN IPv6 Link-Local Address : XXXX:XXXX:XXXX:XXXX / 64 When you have finished configuring your IPv6 connection, click the Save Settings button. LAN IPv6 Unique Local Address : ffff::fff:ffff:ffff:1234 /64 Save Settings Don’t Save Settings D-Link DIR-819 User Manual...
Page 83: Advanced

WI-FI PROTECTED SETUP ADVANCED NETWORK GUEST ZONE IPV6 FIREWALL IPV6 ROUTING DIR-819 SETUP To return to the Web UI Table of Contents page, simply click the D-Link logo on the top right INTERNET INTERNET CONNECTION of each page. D-Link DIR-819 User Manual...
Page 84: Virtual Server

<< button to quickly insert a device’s IP address. Private Port: Enter the LAN port number. Inbound Filter: You may set the traffic filter to Allow All or Block All traffic. Click the Save Settings button when you are finished. D-Link DIR-819 User Manual...
Page 85: Port Forwarding

<< button to quickly insert a device’s IP address. UDP: Enter the UDP port number to forward. Inbound Filter: You may set the traffic filter to Allow All or Block All traffic. Click the Save Settings button when you are finished. D-Link DIR-819 User Manual...
Page 86: Application Rules

Select TCP, UDP, or All. Schedule: Select the schedule from the drop-down menu. The default is Always. Refer to Schedules on page 110 for more information on creating new schedules. Click the Save Settings button when you are finished. D-Link DIR-819 User Manual...
Page 87: Qos Engine

QOS SETTINGS Use this section to configure D-Link's QoS Engine powered by QoS Engine Technology. This QoS Engine improves your online gaming experience by ensuring that your game traffic is prioritized over other network traffic, such as FTP or Web.For best performance, use Enable QoS: Enable or disable QoS.
Page 88

QOS SETTINGS Use this section to configure D-Link's QoS Engine powered by QoS Engine Technology. This QoS Engine improves your online gaming experience by ensuring that your game traffic is prioritized over other network traffic, such as FTP or Web.For best performance, use Select the protocol to apply the rule to: TCP, UDP, or All.
Page 89: Network Filter

Don’t Save Settings Schedule: Select the schedule from the drop-down menu. The default is Always. Refer to Schedules on page 110 for more information on creating new schedules. Click the Save Settings button when you are finished. D-Link DIR-819 User Manual...
Page 90: Inbound Filter

255.255.255.255 ☐ 0.0.0.0 255.255.255.255 Cancel INBOUND FILTER RULES LIST INBOUND FILTER RULES LIST The currently defined Inbound Filter rules are listed here. Name Action Remote IP Range Click the Save Settings button when you are finished. D-Link DIR-819 User Manual...
Page 91: Access Control

Add Policy POLICY TABLE Enable Policy Machine Filtering Logged Schedule POLICY TABLE Save Settings Don’t Save Settings The currently defined access control policies are listed in this table. Click the Save Settings button when you are finished. D-Link DIR-819 User Manual...
Page 92: Add Policy

Computer Name dropdown Clone Your PC’s MAC Address menu to quickly select a computer. The IP address is automatically Cancel populated. Machine Prev Next Save Cancel D-Link DIR-819 User Manual...
Page 93

☑ Apply Advanced Port Filters : Apply Web Filter: Check this box to enable Web Access Logging. Prev Next Save Cancel Apply Advanced Check this box to enable port filtering. Port Filters: Click Next to continue. D-Link DIR-819 User Manual...
Page 94

Enable or disable Web Access logging. You may view the web access Web Access Logging : ž Disabled š Enabled log from the Status > Logs section of the web configuration utility. Logging: Prev Next Save Cancel Click Save to finish. D-Link DIR-819 User Manual...
Page 95: Website Filter

DENY computers access to ONLY these sites Clear the list below... Website URL/ Enter website URL/Domains in each box. Website URL/Domain Domain: Click the Save Settings button when you are finished. Save Settings Don’t Save Settings D-Link DIR-819 User Manual...
Page 96: Firewall Settings

DHCP reservation to ensure that the machine always receives the same address from the DHCP server. Use the Computer Name dropdown menu and the << button to quickly select a device. The IP address is automatically populated. D-Link DIR-819 User Manual...
Page 97

This ALG may interfere with the operation of such devices. If Save Settings Don’t Save Settings you are having trouble making VoIP calls, try turning this ALG off. Click the Save Settings button when you are finished. D-Link DIR-819 User Manual...
Page 98: Routing

Enter the gateway IP address. ☐ WAN(172.17.5.x) ▼ Netmask Gateway Metric: Enter the metric value between 1-255. Save Settings Don’t Save Settings Interface: Select the Interface from the drop-down menu. Click the Save Settings button when you are finished. D-Link DIR-819 User Manual...
Page 99: Advanced Wireless

WLAN Partition: Check this box to enable WLAN Partition. WLAN partition prevents wireless clients from communicating with each other. WMM Enable: Enable or Disable Wi-Fi MultiMedia QoS. Click the Save Settings button when you are finished. D-Link DIR-819 User Manual...
Page 100: Wi-fi Protected Setup

Connect your Click this button to launch the WPS Add Device Wizard. Refer to Add Wireless Device: Wireless Device with WPS on page 47 for more information. Click the Save Settings button when you are finished. D-Link DIR-819 User Manual...
Page 101: Advanced Network

Enable to allow IPv4 multicast traffic to pass through the router from Streams: the Internet. IPV6 MULTICAST STREAMS Enable IPv6 Enable to allow IPv6 multicast traffic to pass through the router from Multicast Streams: the Internet. Click the Save Settings button when you are finished. D-Link DIR-819 User Manual...
Page 102: Guest Zone

Select a wireless security encryption option. The options are None, WEP, WPA-Personal, and WPA-Enterprise. Using WPA is recommended. Refer to Wireless Security Mode on page 52 for more information. Click the Save Settings button when you are finished. D-Link DIR-819 User Manual...
Page 103: Ipv6 Firewall

Enter the source IP address and specify the prefix length for the rule. PrefixLength: Select the protocol to apply the rule to, either ALL, TCP, UDP, or ICMP. Protocol: Select the destination interface, WAN or LAN, from the drop down Destination Interface: menu. D-Link DIR-819 User Manual...
Page 104

Turn IPv6 Filtering ON and ALLOW rules listed Turn IPv6 Filtering ON and DENY rules listed Name Schedule Always ▼ IP Address /PrefixLength Interface Protocol Source ☐ ▼ ▼ IP Address /PrefixLength Interface Port Range Dest ▼ Save Settings Don’t Save Settings D-Link DIR-819 User Manual...
Page 105: Ipv6 Routing

Enter the metric value between 1-255. NULL ▼ Save Settings Don’t Save Settings Interface: Select the Interface from the drop-down menu. Gateway: Enter the gateway IPv6 address. Click the Save Settings button when you are finished. D-Link DIR-819 User Manual...
Page 106: Tools

Details : Allow All Save Settings Don’t Save Settings DIR-819 SETUP To return to this Web UI Table of Contents page, simply click the D-Link logo on the top INTERNET INTERNET CONNECTION right of each page. D-Link DIR-819 User Manual...
Page 107: Admin

Inbound Filter: remote administration. Refer to Inbound Filter on page 86 for more information. Details: The current status of the Remote Administration Inbound filter is displayed here. Click the Save Settings button when you are finished. D-Link DIR-819 User Manual...
Page 108: Time

▼ ▼ ▼ 2 am ▼ Dates: AUTOMATIC TIME AND DATE CONFIGURATION ☑ Automatically synchronize with D-Link’s Internet time server NTP Server Used : ntp1.dlink.com ▼ SET THE TIME AND DATE MANUALLY AUTOMATIC TIME AND DATE CONFIGURATION Year 2016 Month ▼...
Page 109: Syslog

Enter the IP address of the syslog server. Use the Computer Name Save Settings Don’t Save Settings Address: dropdown menu and the << button to quickly select a device. The IP address is automatically populated. Click the Save Settings button when you are finished. D-Link DIR-819 User Manual...
Page 110: System

Save button above. Reboot The Device: Click this button to reboot the device. Clear Language If the device is of other language than English, clicking this button Pack: to convert the router’s language back to English. D-Link DIR-819 User Manual...
Page 111: Firmware

Firmware Click Firmware on the navigation menu to configure the firmware. Please check the D-Link support website for firmware updates and new language packs at http://support.dlink.com. Be sure to keep your router firmware updated to help protect against the latest cyber threats.
Page 112: Dynamic Dns

Click Dynamic DNS on the navigation menu to configure the Dynamic Domain Name Server (DDNS) client. DDNS makes accessing your network from the Internet easier by providing you with an easy to use web address. Owners of D-Link routers can use the dlinkdns service. DIR-819...
Page 113: System Check

Host Name or IP Address : Ping Address: and click Ping. IPV6 PING TEST Host Name or IPv6 Address : Ping PING RESULT Result here PING RESULT The results of the test are displayed in this dialog box. D-Link DIR-819 User Manual...
Page 114: Schedules

Click the Add button when you are satisfied with your new schedule. SCHEDULE RULES LIST The currently added rules are displayed in this table. You may edit or delete a rule by clicking on its corresponding Edit or Delete buttons. D-Link DIR-819 User Manual...
Page 115: Status

Connection Up Time : 0 Day 0 Hour 0 Min 0 Sec MAC Address : ff:ff:ff:ff:ff:ff IP Address : 192.168.0.1 DIR-819 SETUP To return to this Web UI Table of Contents page, simply click the D-Link logo on the top INTERNET INTERNET CONNECTION right of each page. D-Link DIR-819 User Manual...
Page 116: Device Info

Channel Width : 20/40MHz Channel : 1 Network Name (SSID) : Your_2.4GHz_Network Wi-Fi Protected Setup : Enabled/Not configured Security : NONE Guest Zone Wireless Radio : Disabled Guest Zone Network Name (SSID) : Guest Zone Security : NONE D-Link DIR-819 User Manual...
Page 117

Guest Zone Security : NONE LAN COMPUTERS IGMP MULTICAST MEMBERSHIPS MAC Address IP Address Name(if any) ff:ff:ff:ff:ff:ff The DIR-819’s current IGMP multicast information is displayed here. IGMP MULTICAST MEMBERSHIPS IPv4 Multicast Group Address IPv6 Multicast Group Address D-Link DIR-819 User Manual...
Page 118: Logs

To change the levl of information to view and then click the Save LOG FILES Settings button. First Page Last Page Previous Next Clear Time Message Sep 19 09:15:05 2016 User Admin login success LOG FILES Click the navigation buttons to view the log file. D-Link DIR-819 User Manual...
Page 119: Statistics

Sent : Received : TX Packets Dropped : RX Packets Dropped : Collisions : Errors : WIRELESS STATISTICS - 5GHZ BAND Sent : Received : TX Packets Dropped : RX Packets Dropped : Collisions : Errors : D-Link DIR-819 User Manual...
Page 120: Internet Sessions

Internet connections. This page helps to diagnose connectivity issues. Click the Refresh button to view the latest information. DIR-819 STATUS INTERNET SESSIONS INTERNET SESSIONS INTERNET SESSIONS This page displays Source and Destination sessions passing through the device. Refresh Protocol Internet State Time Out 192.168.0.100 54674 192.168.0.1 D-Link DIR-819 User Manual...
Page 121: Wireless

View the wireless clients that are connected to the router. (A client might linger in the list for a few minutes after an unexpected disconnect.) NUMBER OF WIRELESS CLIENTS - 2.4GHZ BAND : 0 MAC Address IP Address Mode Rate(Mbps) Signal (%) NUMBER OF WIRELESS CLIENTS - 5GHZ BAND : 0 MAC Address IP Address Mode Rate(Mbps) Signal (%) D-Link DIR-819 User Manual...
Page 122: Routing

Click Routing to view the currently configured IPv4 routing table. DIR-819 STATUS ROUTING ROUTING ROUTING Routing Table This page displays the routing details configured for your router. ROUTING TABLE Destination Gateway Genmask Metric Iface Creator 192.168.0.100 0.0.0.0 255.255.255.0 eth1 D-Link DIR-819 User Manual...
Page 123: Ipv6

The current IPv6 Link-Local address is listed here. IPv6 Default Gateway : NONE LAN IPv6 Link-Local Address : ffff::fff:fff:ffff:ffff Address: LAN IPV6 COMPUTERS IPv6 Address Name(if any) LAN IPV6 COMPUTERS The currently connected IPv6 computers are listed in this table. D-Link DIR-819 User Manual...
Page 124: Ipv6 Routing

Click IPv6 Routing to view the currently configured IPv6 routing table. DIR-819 STATUS IPV6 ROUTING IPV6 ROUTING IPV6 ROUTING This page displays IPV6 routing details configured for your router. IPV6 ROUTING TABLE Destination IP Gateway Metric Interface fe800000000000000000000000 000000000000000000000000 000000/64 00000000 D-Link DIR-819 User Manual...
Page 125: Support

• Network Filter • Inbound Filter • Access Control • Website filter • Firewall Settings • Routing • Advanced Wireless • Wi-Fi Protected Setup • Advanced Network • Guest Zone • IPv6 Firewall • IPv6 Routing D-Link DIR-819 User Manual...
Page 126: Connect A Wireless Client To Your Router

Step 2 - Within 2 minutes, press the WPS button on your wireless device (or launch the software utility and start the WPS process). Step 3 - Allow up to 1 minute for your connection to be configured. Once the WPS LED stops blinking, you will be connected and your wireless connection will be secure with WPA2. D-Link DIR-819 User Manual...
Page 127: Windows® 10

Wireless Icon Clicking on this icon will display a list of wireless networks which are within range of your computer. Select the desired network by clicking on the SSID. D-Link DIR-819 User Manual...
Page 128

Your computer will now automatically connect to this wireless network when it is detected. You can also use Wi-Fi Protected Setup (WPS) to connect to the router. Press the WPS button on your D-Link device and you will be automatically connected. D-Link DIR-819 User Manual...
Page 129: Windows® 8

Wireless Icon Clicking on this icon will display a list of wireless networks that are within connecting proximity of your computer. Select the desired network by clicking on the network name. D-Link DIR-819 User Manual...
Page 130

WPS button on your router during this step to enable the WPS function. When you have established a successful connection to a wireless network, the word Connected will appear next to the name of the network to which you are connected to. D-Link DIR-819 User Manual...
Page 131: Windows® 7

If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Click on the wireless icon in your system tray (lower-right corner). Wireless Icon 2. The utility will display any available wireless networks in your area. D-Link DIR-819 User Manual...
Page 132

If you get a good signal but cannot access the Internet, check your TCP/ IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. 4. The following window appears while your computer tries to connect to the router. D-Link DIR-819 User Manual...
Page 133: Wps

The WPS feature of the DIR-819 can be configured using Windows® 7. Carry out the following steps to use Windows® 7 to configure the WPS feature: 1. Click the Start button and select Computer from the Start menu. 2. Click Network on the left side. D-Link DIR-819 User Manual...
Page 134

Section 4 - Connecting to a Wireless Network 3. Double-click the DIR-819. DIR-819 4. Input the WPS PIN number (on the router label) in the Setup > Wireless Setup menu in the Router’s Web UI) and click Next. D-Link DIR-819 User Manual...
Page 135

Section 4 - Connecting to a Wireless Network 5. Type a name to identify the network. 6. To configure advanced settings, click the icon. Click Next to continue. D-Link DIR-819 User Manual...
Page 136

Make a note of the security key as you may need to provide this security key if adding an older wireless device to the network in the future. 9. Click Close to complete WPS setup. D-Link DIR-819 User Manual...
Page 137: Windows Vista

(displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DIR-819 User Manual...
Page 138: Wpa/wpa2

1. Open the Windows Vista® Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network. 2. Highlight the Wi-Fi name (SSID) you would like to connect to and click Connect. D-Link DIR-819 User Manual...
Page 139

It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router. D-Link DIR-819 User Manual...
Page 140: Troubleshooting

1. Why can’t I access the web-based configuration utility? When entering the IP address of the D-Link router (192.168.11.1 for example), you are not connecting to a website, nor do you have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility.
Page 141

• Close your web browser (if open) and open it. • Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for your web management.
Page 142

• Windows® 95, 98, and Me users type in command (Windows® NT, 2000, XP, Vista®, and 7 users type in cmd) and press Enter (or click OK). • Once the window opens, you’ll need to do a special ping. Use the following syntax: ping [url] [-f] [-l] [MTU value] Example: ping yahoo.com -f -l 1472 D-Link DIR-819 User Manual...
Page 143

• To change the MTU, enter the number in the MTU field and click Save Settings to save your settings. • Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. D-Link DIR-819 User Manual...
Page 144: Wireless Basics

D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business, or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when, and where you want it. You will be able to enjoy the freedom that wireless networking delivers.
Page 145: What Is Wireless

D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network. How does wireless work? Wireless works similarly to how cordless phones work, through radio signals that transmit data from one point A to point B.
Page 146

The wireless connection in public places is usually called “hotspots”. Using a D-Link USB adapter with your laptop, you can access the hotspot to connect to the Internet from remote locations like: airports, hotels, coffee shops, libraries, restaurants, and convention centers.
Page 147: Tips

Don’t let your next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on the WPA or WEP security feature on the router. Refer to the product manual for detail information on how to set it up. D-Link DIR-819 User Manual...
Page 148: Wireless Modes

An Infrastructure network contains an access point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. An Ad-hoc network contains only clients, such as laptops with wireless USB adapters. All the adapters must be in Ad-hoc mode to communicate. D-Link DIR-819 User Manual...
Page 149: Networking Basics

Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.
Page 150: Statically Assign An Ip Address

Set Primary DNS the same as the LAN IP address of your router (192.168.11.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DIR-819 User Manual...
Page 151: Wireless Security

WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public key encryption system to ensure that only authorized network users can access the network. D-Link DIR-819 User Manual...
Page 152: Technical Specifications

Environmental factors will adversely affect wireless signal range. 2 Frequency Range varies depending on country’s regulation. 3 The DIR-819 does not include 5.47-5.725 GHz in some regions. D-Link DIR-819 User Manual...
Page 153: Regulatory Information

Note The country code selection is for non-USA models only and is not available to all USA models. Per FCC regulations, all WiFi product marketed in the USA must be fixed to USA operational channels only. D-Link DIR-819 User Manual...
Page 154

FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. D-Link DIR-819 User Manual...
Page 155

Cet équipement est conforme aux limites d'exposition aux rayonnements ISED établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. D-Link DIR-819 User Manual...