Tr-069 Client - D-Link AC1200 User Manual

Section 4 - Configuration
On the TR-069 Client page, you can configure the router for communication
with a remote Auto Configuration Server (ACS). The TR-069 client is used for
remote monitoring and management of the device.

TR-069 Client

Interface: Select the interface over which the client should operate.
Enable TR-069
Toggle this switch to enable or disable TR-069.
client:
Auto Configuration Server Settings
URL address: Specify the URL of your ISP's ACS.
Username:
Specify the username for your ISP's ACS.
Password:
Specify the password for your ISP's ACS.
Inform Settings
Enable: Toggle this switch to enable active contact with your ISP's ACS.
Interval: Specify the interval in seconds for each inform packet.
Connection Request Settings
Username:
Specify the username here.
D-Link DIR-1210 User Manual
TR-069 Client
99