Download Print this page

D-Link AC1200 User Manual

Wireless dual-band multi-wan router.
Hide thumbs

Advertisement

Version 1.00 | 04/19/2017
User Manual
Wireless AC1200 Dual-Band Multi-WAN Router
DWR-118

Advertisement

   Also See for D-Link AC1200

   Related Manuals for D-Link AC1200

   Summary of Contents for D-Link AC1200

  • Page 1: User Manual

    Version 1.00 | 04/19/2017 User Manual Wireless AC1200 Dual-Band Multi-WAN Router DWR-118...

  • Page 2: Manual Revisions

    Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision Date Description 1.00 April 19, 2017 • Initial release...

  • Page 3: Table Of Contents

    Outbound Filter ..............44 PPTP ..................14 Inbound Filter ..............45 L2TP ..................16 SNMP ..................46 4G LTE / 3G ...............18 Advanced Network ............47 Wizard ..................20 System ....................48 Failover ...................24 Time Settings ...............48 IPv6 ..................25 Administration ..............49 Link-local Only ..............25 D-Link DWR-118 User Manual...

  • Page 4

    WPA/WPA2 ................59 WPS PIN ..................62 Windows Vista® ................66 WPA/WPA2 ................67 Windows® XP ................69 WPA/WPA2 ................70 Troubleshooting ..............72 Wireless Basics ..............76 What is Wireless? .................77 Tips ....................79 Wireless Modes ................80 Networking Basics ............81 Check your IP address ...............81 D-Link DWR-118 User Manual...

  • Page 5: Product Overview

    Section 1 - Product Overview Product Overview Package Contents DWR-118 Wireless AC1200 Dual-Band Multi-WAN Router Power Adapter RJ45 Cable CD (not available in all regions) If any of the above items are missing, please contact your reseller. System Requirements • A compatible mini-SIM/UICC card with USB dongle and service* OR boardband Internet service* •...

  • Page 6: Introduction

    Section 1 - Product Overview Introduction The D-Link Wireless AC1200 Dual-Band Multi-WAN Router allows users to access worldwide mobile broadband networks. Once connected, users can transfer data, stream media, and send SMS messages. Simply insert a 3G / 4G USB modem, and share your 3G / 4G Internet connection through an encrypted 802.11ac wireless network, the gigabit Ethernet LAN port or...

  • Page 7: Hardware Overview

    Reset Button Press this button with an unfolded paperclip and hold for ten seconds to reset the device. WPS Button Press this button to initiate a new WPS connection. See WPS on page 62 for details. D-Link DWR-118 User Manual...

  • Page 8: Leds

    2.4 GHz WLAN LED Will be lit if the 2.4 GHz wireless function is enabled, and will blink when wireless data is being transferred. USB LED Will be lit if a USB dongle is successfully connected. D-Link DWR-118 User Manual...

  • Page 9: Back View

    Back View Ethernet LAN Ports For connection to a network-enabled device, such as a desktop or notebook computer. Ethernet WAN Port For connection to a DSL/cable modem or router. Power Connector Connects to the included power adapter. D-Link DWR-118 User Manual...

  • Page 10: Installation

    The LEDs on the front panel will flash on and off as the DWR-118 performs initialization and Internet connection processes. c. After a few moments, if a connection has been established, the following LEDs will turn solid green: Power, WAN, WLAN, and any LAN Port LEDs that are connected to computers or other devices. D-Link DWR-118 User Manual...

  • Page 11: Wireless Installation Considerations

    1. Minimize the number of walls and ceilings between the D-Link router and other network devices. Each wall or ceiling can reduce your adapter’s range from 1 to 30 meters (3 to 90 feet).

  • Page 12: Configuration

    At the top of the page is a menu. Clicking on one of these icons will take you to the appropriate configuration section. On each page, fill out the desired settings and click Apply when you are done or Reset to revert to the old settings. D-Link DWR-118 User Manual...

  • Page 13: Internet

    MAC address on the router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone button to replace the WAN port’s MAC address with the MAC address of your PC. D-Link DWR-118 User Manual...

  • Page 14

    Checking this option will disable the NAT function of the DWR-118, allowing it to act as a link for your devices to your Internet connection, but without routing functions. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-118 User Manual...

  • Page 15: Static Ip

    Enabling this option will disable the NAT function of the DWR-118, allowing it to act as a link for your devices to your Internet connection, but without routing functions. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-118 User Manual...

  • Page 16: Pppoe (username / Password)

    The amount of time of inactivity before disconnecting an Time: established PPPoE session. Set it to zero or enable auto-reconnect to disable this feature. MTU: You may need to change the Maximum Transmission Unit (MTU) for optimal performance. The default value is 0. D-Link DWR-118 User Manual...

  • Page 17

    Enabling this option will disable the NAT function of the DWR-118, NAT disable: allowing it to act as a link for your devices to your Internet connection, but without routing functions. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-118 User Manual...

  • Page 18: Pptp

    Maximum Idle Time setting. Maximum Idle Enter an idle time in seconds before your PPTP session is Time: automatically disconnected. To disable this feature, set the timer to zero or choose Always-on. D-Link DWR-118 User Manual...

  • Page 19

    Enabling this option will disable the NAT function of the DWR-118, allowing it to act as a link for your devices to your Internet connection, but without routing functions. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-118 User Manual...

  • Page 20: L2tp

    Maximum Idle Time setting. Maximum Idle Enter an idle time in seconds before your L2TP session is Time: automatically disconnected. To disable this feature, set the timer to zero or choose Always-on. D-Link DWR-118 User Manual...

  • Page 21

    Enabling this option will disable the NAT function of the DWR-118, allowing it to act as a link for your devices to your Internet connection, but without routing functions. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-118 User Manual...

  • Page 22: 4g Lte / 3g

    ISP(optional). Pin Code: If your SIM is PIN-locked, enter the PIN associated with your SIM card. Select Auto or Manual to determine whether the router should Reconnect Mode: reconnect to your 3G/4G network automatically or manually. D-Link DWR-118 User Manual...

  • Page 23

    IP address has been assigned by your ISP. If transparent bridge is enabled, the above NAT Disable option will not be available. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-118 User Manual...

  • Page 24: Wizard

    Note: The DWR-118 has a WAN failover feature that allows the router to switch to a 3G/4G connection if the WAN connection is down or unavailable. To configure this feature, please refer to Failover on page 24. D-Link DWR-118 User Manual...

  • Page 25

    After entering the requested information,click Next to continue. Note: If you are not sure what connection type to use or what settings to enter, check with your Internet Service Provider (ISP). D-Link DWR-118 User Manual...

  • Page 26

    Unless you chose None in the previous step, enter a security password. Clients must enter this password to connect to your wireless network. You will be prompted to select a password for both your 2.4 GHz and 5 GHz networks. Click Next to continue. D-Link DWR-118 User Manual...

  • Page 27

    Create a new administration password and then click Next to continue. Select your time zone from the drop-down box and then click Next to continue. This completes the Internet Connection Setup Wizard. Click Connect to save your changes and reboot the router. D-Link DWR-118 User Manual...

  • Page 28: Failover

    If Failover has been selected, this will be used as the backup connection only. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-118 User Manual...

  • Page 29: Ipv6

    Link-local Only LAN IPv6 Link- Displays the IPv6 address of the router. Local Address: Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-118 User Manual...

  • Page 30: Static Ipv6

    Select Stateful (DHCPv6), SLAAC + RDNSS, or SLAAC + Stateless DHCPv6. Type: Router Enter the IPv6 address lifetime (in seconds). Advertisement Lifetime: Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-118 User Manual...

  • Page 31: Autoconfiguration (slaac/dhcpv6)

    Select Stateful (DHCPv6), SLAAC + RDNSS, or SLAAC + Stateless DHCPv6. Type: Router Enter the IPv6 address lifetime (in seconds). Advertisement Lifetime: Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-118 User Manual...

  • Page 32: Pppoe

    Select Stateful (DHCPv6), SLAAC + RDNSS, or SLAAC + Stateless Autoconfiguration Type: DHCPv6. Router Enter the IPv6 address lifetime (in seconds). Advertisement Lifetime: Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-118 User Manual...

  • Page 33: Wi-fi

    Section 3 - Configuration Wi-Fi Device List This page displays a list of currently connected wireless clients, and their respective MAC addresses. The lists are separated by wireless frequency (2.4 GHz and 5 GHz). D-Link DWR-118 User Manual...

  • Page 34: Wi-fi Settings

    The default setting is Visible. Select Invisible if you do not want to broadcast the SSID of your wireless network. Security Mode: Select the desired wireless encryption mode. WPA/WPA2 is recommended if your clients support it. D-Link DWR-118 User Manual...

  • Page 35

    Pre-Shared Key: Enter the key/password you want to use for your wireless network. The key must be between 8 and 63 characters long, and may only contain letters and numbers. D-Link DWR-118 User Manual...

  • Page 36: Wps

    CONFIGURED to block WPS configuration of the router. Disable WPS-PIN Enable this option to prevent clients from connecting to the router Method: using the PIN method. If this option is enabled, clients must use the push-button method to connect. D-Link DWR-118 User Manual...

  • Page 37

    WPS status: This will show the current WPS connection process status. Click the Trigger button to initiate a WPS connection. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-118 User Manual...

  • Page 38: Wi-fi Advanced

    Enable this option to improve the quality of video and voice applications for your wireless clients. TX Rates: Select transfer rates based on the speed of wireless adapters on your wireless network. It is strongly recommended to keep this setting to Best. D-Link DWR-118 User Manual...

  • Page 39

    20 MHz. This feature is can only be toggled for 2.4 GHz networks. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-118 User Manual...

  • Page 40: Lan

    Enter the subnet mask of the router. The default subnet mask is 255.255.255.0. Mask: Local Domain Enter the local domain name for your network. Name: Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-118 User Manual...

  • Page 41: Dhcp

    Select a DHCP client and click Copy to, or enter the MAC address and IP address manually, to assign the IP address to the MAC address. Click Enable to enable the rule. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-118 User Manual...

  • Page 42: Advanced

    Enter the Host Name that you registered with your DDNS service provider. Username / Enter the Username for your DDNS account. E-mail: Password / Key: Enter the Password for your DDNS account. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-118 User Manual...

  • Page 43: Applications

    Specify the incoming port(s) to open when traffic comes over the Trigger port. Enable: Check the box to enable the specified rule. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-118 User Manual...

  • Page 44: Url Filter

    Enter URL that you would like to block. All URLs that begin with this string will be blocked. Enable: Check the box to enable the specified rule. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-118 User Manual...

  • Page 45: Routing

    Enable: Select this box to enable the rule. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-118 User Manual...

  • Page 46: Qos

    Specify the schedule rule number. To create a new schedule, click on the Add New Rule button. For more information about schedules, please refer to Schedules on page 53. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-118 User Manual...

  • Page 47: Mac Address Filter

    MAC filtering settings specified above. If this box is ticked, the rule will follow the association control setting specified in MAC filtering settings specified above. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-118 User Manual...

  • Page 48: Outbound Filter

    Previous Page: Go back to the previous filter page. Next Page: Advance to the next filter page. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-118 User Manual...

  • Page 49: Inbound Filter

    Previous Page: Go back to the previous filter page. Next Page: Advance to the next filter page. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-118 User Manual...

  • Page 50: Snmp

    IP addresses will be denied remote SNMP access. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-118 User Manual...

  • Page 51: Advanced Network

    Select the box to allow the WAN port to be “pinged. ” Blocking WAN Respond: pings may provide some extra security from hackers. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-118 User Manual...

  • Page 52: System

    Enter an NTP server to use for time synchronization, or use the drop-down box to select one. Click the Update Now button to synchronize the time with the NTP server. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-118 User Manual...

  • Page 53: Administration

    Port: This is the port number used to access the router. 8080 is the port generally used for the web-management interface. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-118 User Manual...

  • Page 54: Reboot & Reset

    This option will restore all settings back to their defaults. Any Default Settings: settings that have not been backed up will be lost, including any rules that you have created. Reboot the This option will reboot the router. Device: D-Link DWR-118 User Manual...

  • Page 55: Firmware Upgrade

    Here, you can upgrade the firmware of your router. Make sure the firmware you want to use is on the local hard drive of the computer and then click Browse to upload the file. You can check for and download firmware updates on the D-Link support site at http://support.dlink.com.

  • Page 56: System Log

    Syslog Server: Syslog Server IP Enter the IP address of the Syslog server that the router will send Address: the logs to. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-118 User Manual...

  • Page 57: Schedules

    Select a day of the week for the start time and end time. Start Time Enter the time at which you would like the schedule to become (hh:mm): active. End Time Select the time at which you would like the schedule to become (hh:mm): inactive. D-Link DWR-118 User Manual...

  • Page 58: Connect A Wireless Client To Your Router

    Step 2 - Within 2 minutes, press the WPS button on your wireless client (or launch the software utility and start the WPS process). Step 3 - Allow up to 1 minute for your connection to be configured. Once the Wi-Fi light stops blinking, you will be connected and your wireless connection will be protect with WPA2 encryption. D-Link DWR-118 User Manual...

  • Page 59: Windows® 10

    Wireless Icon Clicking on this icon will display a list of wireless networks which are within range of your computer. Select the desired network by clicking on its SSID. D-Link DWR-118 User Manual...

  • Page 60

    It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router. D-Link DWR-118 User Manual...

  • Page 61: Windows® 8

    Wireless Icon Clicking on this icon will display a list of wireless networks that are within connecting proximity of your computer. Select the desired network by clicking on the network name. D-Link DWR-118 User Manual...

  • Page 62

    WPS button on your router during this step to enable the WPS function. When you have established a successful connection to a wireless network, the word Connected will appear next to the name of the network to which you are connected to. D-Link DWR-118 User Manual...

  • Page 63: Windows® 7

    If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Click on the wireless icon in your system tray (lower-right corner). Wireless Icon 2. The utility will display any available wireless networks in your area. D-Link DWR-118 User Manual...

  • Page 64

    If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to Networking Basics on page 81 for more information. 4. The following window appears while your computer tries to connect to the router. D-Link DWR-118 User Manual...

  • Page 65

    It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router. D-Link DWR-118 User Manual...

  • Page 66: Wps Pin

    The WPS-PIN feature of the DWR-118 can be configured using Windows® 7. Carry out the following steps to use Windows® 7 to configure the WPS feature. 1. Click the Start button and select Computer from the Start menu. 2. Click Network on the left side. D-Link DWR-118 User Manual...

  • Page 67

    Section 4 - Connecting to a Wireless Network 3. Double-click the DWR-118. 4. Input the WPS PIN number (on the router label) in the Setup > Wireless Setup menu in the Router’s Web UI) and click Next. D-Link DWR-118 User Manual...

  • Page 68

    Section 4 - Connecting to a Wireless Network 5. Type a name to identify the network. 6. To configure advanced settings, click the icon. Click Next to continue. D-Link DWR-118 User Manual...

  • Page 69

    Make a note of the security key as you may need to provide this security key if adding an older wireless device to the network in the future. 9. Click Close to complete WPS setup. D-Link DWR-118 User Manual...

  • Page 70: Windows Vista

    (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DWR-118 User Manual...

  • Page 71: Wpa/wpa2

    1. Open the Windows Vista® Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network. 2. Highlight the Wi-Fi name (SSID) you would like to connect to and click Connect. D-Link DWR-118 User Manual...

  • Page 72

    It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router. D-Link DWR-118 User Manual...

  • Page 73: Windows® Xp

    Wi-Fi network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DWR-118 User Manual...

  • Page 74: Wpa/wpa2

    1. Open the Windows® XP Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. 2. Highlight the Wi-Fi network (SSID) you would like to connect to and click Connect. D-Link DWR-118 User Manual...

  • Page 75

    It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The Wi-Fi password must be exactly the same as on the wireless router. D-Link DWR-118 User Manual...

  • Page 76: Troubleshooting

    1. Why can’t I access the web-based configuration utility? When entering the IP address of the D-Link router (192.168.0.1 for example), you are not connecting to a website, nor do you have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility.

  • Page 77

    • Close your web browser (if open) and open it. • Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for your web management.

  • Page 78

    • Windows® 95, 98, and Me users type in command (Windows® NT, 2000, XP, Vista®, 7, 8, and 10 users type in cmd) and press Enter (or click OK). • Once the window opens, you’ll need to do a special ping. Use the following syntax: ping [url] [-f] [-l] [MTU value] Example: ping yahoo.com -f -l 1472 D-Link DWR-118 User Manual...

  • Page 79

    • To change the MTU, enter the number in the MTU field and click Apply to save your settings. • Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. D-Link DWR-118 User Manual...

  • Page 80: Wireless Basics

    D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business, or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when, and where you want it. You will be able to enjoy the freedom that wireless networking delivers.

  • Page 81: What Is Wireless

    D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network. How does wireless work? Wireless works similarly to how cordless phones work, through radio signals that transmit data from one point A to point B.

  • Page 82

    Who uses wireless? Wireless technology as become so popular in recent years that almost everyone is using it, whether it’s for home, office, business, D-Link has a wireless solution for it. Home Uses/Benefits • Gives everyone at home broadband access •...

  • Page 83: Tips

    The wireless connection in public places is usually called “hotspots”. Using a D-Link CardBus Adapter with your laptop, you can access the hotspot to connect to the Internet from remote locations like: airports, hotels, coffee shops, libraries restaurants, and convention centers.

  • Page 84: Wireless Modes

    An Infrastructure network contains an access point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. An ad hoc network contains only clients, such as laptops with wireless CardBus adapters. All the adapters must be in ad hoc mode to communicate. D-Link DWR-118 User Manual...

  • Page 85: Networking Basics

    Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.

  • Page 86: Statically Assign An Ip Address

    Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Alternate DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DWR-118 User Manual...

  • Page 87: Wireless Encryption

    WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public key encryption system to ensure that only authorized network users can access the network. D-Link DWR-118 User Manual...

  • Page 88: Technical Specifications

    Maximum wireless signal rate derived from IEEE Standard 802.11ac/n/g/b specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range. D-Link DWR-118 User Manual...

  • Page 89

    Potencia máxima de Salida Frequenza/e Potenza max. Output Frequentie(s) Max. Output Power 5.15 – 5.25 GHz 200 mW 5.25 – 5.35 GHz 200 mW 5.47 – 5.725 GHz 2.4 G 2.4 – 2.4835 GHz 100 mW D-Link DWR-118 User Manual...

  • Page 90

    υλικολογισμικό του προϊόντος είναι διαθέσιμα για λήψη από τη σελίδα του προϊόντος στην τοποθεσία www.dlink. com. Par les présentes, D-Link Corporation déclare que ce produit, ces accessoires et ce logiciel sont conformes aux Français [French] directives 2014/53/UE.Le texte complet de la déclaration de conformité de l'UE et le icroprogramme du produit sont disponibles au téléchargement sur la page des produits à...

  • Page 91

    2014/53/EU. Pełen tekst deklaracji zgodności UE oraz oprogramowanie sprzętowe do produktu można pobrać na stronie produktu w witrynie www.dlink.com. Desta forma, a D-Link Corporation declara que este produto, os acessórios e o software estão em conformidade Português [Portuguese] com a diretiva 2014/53/UE. O texto completo da declaração de conformidade da UE e do firmware...

  • Page 92

    2014/53/EU. Hela texten med EU-försäkran om överensstämmelse och produkt-firmware kan hämtas från produktsidan på www.dlink.com. Hér með lýsir D-Link Corporation því yfir að þessi vara, fylgihlutir og hugbúnaður eru í samræmi við tilskipun Íslenska [Icelandic] 2014/53/EB. Sækja má ESB-samræmisyfirlýsinguna í heild sinni og fastbúnað vörunnar af vefsíðu vörunnar á www.

  • Page 93

    Access Points unterstützen die Funktionen DFS (Dynamic Frequency Selection) und TPC (Transmit Power Control) wie erforderlich bei Betrieb auf 5 GHz innerhalb der EU. • Bitte schlagen Sie im Handbuch oder Datenblatt nach nach, ob Ihr Gerät eine 2,4 GHz und / oder 5 GHz Verbindung nutzt. D-Link DWR-118 User Manual...

  • Page 94

    5 GHz dentro de la UE. • Por favor compruebe el manual o la ficha de producto para comprobar si el producto utiliza las bandas inalámbricas de 2.4 GHz y/o la de 5 GHz. D-Link DWR-118 User Manual...

  • Page 95

    Toegangspunten ondersteunen DFS (Dynamic Frequency Selection) en TPC (Transmit Power Control) functionaliteit zoals vereist bij gebruik in 5 GHz binnen de EU. • Raadpleeg de handleiding of de datasheet om te controleren of uw product gebruik maakt van 2.4 GHz en/of 5 GHz. D-Link DWR-118 User Manual...

  • Page 96

    • Halten Sie das Produkt von Heizkörpern und anderen Quellen fern, die Wärme erzeugen. • Trennen Sie das Produkt immer von der Stromzufuhr, bevor Sie es reinigen und verwenden Sie dazu ausschließlich ein trockenes fusselfreies Tuch. D-Link DWR-118 User Manual...

  • Page 97

    • Mantenga el producto alejado de los radiadores y de otras fuentes de calor. • Desenchufe siempre el producto de la alimentación de red antes de limpiarlo y utilice solo un paño seco sin pelusa. D-Link DWR-118 User Manual...

  • Page 98

    • Houd het product uit de buurt van radiators en andere warmtebronnen. • U dient het product steeds los te koppelen van de stroom voordat u het reinigt en gebruik uitsluitend een droge pluisvrije doek. D-Link DWR-118 User Manual...

  • Page 99

    D-Link designs and builds its products to be as environmentally friendly as possible, by using recyclable, low toxic materials in both products and packaging. D-Link recommends that you always switch off or unplug your D-Link products when they are not in use. By doing so you will help to save energy and reduce CO2 emissions.

  • Page 100

    D-Link et l’environnement Chez D-Link, nous sommes conscients de l'impact de nos opérations et produits sur l'environnement et nous engageons à le réduire. Pour limiter cet impact, D-Link conçoit et fabrique ses produits de manière aussi écologique que possible, en utilisant des matériaux recyclables et faiblement toxiques, tant dans ses produits que ses emballages.

  • Page 101

    D-Link zijn producten zo milieuvriendelijk mogelijk, door het gebruik van recycleerbare producten met lage toxiciteit in product en verpakking. D-Link raadt aan om steeds uw D-Link producten uit te schakelen of uit de stekker te halen wanneer u ze niet gebruikt. Door dit te doen bespaart u energie en beperkt u de CO2-emissies.

  • Page 102

    D-Link a životní prostředí Ve společnosti D-Link jsme si vědomi vlivu našich provozů a výrobků na životní prostředí a snažíme se o minimalizaci těchto vlivů. Proto své výrobky navrhujeme a vyrábíme tak, aby byly co nejekologičtější, a ve výrobcích i obalech používáme recyklovatelné a nízkotoxické materiály.

  • Page 103

    D-Link produkter som er så miljøvennlig som mulig, ved å bruke resirkulerbare, lav-toksiske materialer både i produktene og forpakningen. D-Link anbefaler at du alltid slår av eller frakobler D-Link-produkter når de ikke er i bruk. Ved å gjøre dette hjelper du å spare energi og å redusere CO2-utslipp.

  • Page 104

    D-Link sine produkter, så de er så miljøvenlige som muligt, ved at bruge genanvendelige materialer med lavt giftighedsniveau i både produkter og emballage. D-Link anbefaler, at du altid slukker eller frakobler dine D-Link-produkter, når de ikke er i brug. Ved at gøre det bidrager du til at spare energi og reducere CO2-udledningerne.

  • Page 105

    D-Link och miljön På D-Link förstår vi och är fast beslutna att minska den påverkan våra verksamheter och produkter kan ha på miljön. För att minska denna påverkan utformar och bygger D-Link sina produkter för att de ska vara så miljövänliga som möjligt, genom att använda återvinningsbara material med låg gifthalt i både produkter och förpackningar.

Comments to this Manuals

Symbols: 0
Latest comments: