Wps - D-Link AC1200 User Manual

Section 4 - Configuration
The Wi-Fi Protected Setup page allows you to create a wireless connection
between your router and a device automatically by simply pushing a
button. WPS for 2.5 Ghz and 5 Ghz are configured separately by clicking the
corresponding buttons for 2.5 Ghz and 5 Ghz.
WPS Control
Enable/Disable: Click this button to toggle WPS. For security reasons, WPS is disabled
by default.
Establish Click this button to launch the Establish Connection menu,
connection: described below.
Establish Connection
WPS Method Choose PBC (Push Button Connection).
Connect: Click here to initiate the pairing process.
Information
WPS state:
Shows whether it is configured or not.
Network name
Indicates the SSID to which the client is connected.
(SSID):
Network Indicates the type of authentication used on the network.
authentication:
Encryption: Indicates the encryption used by the authentication method.
D-Link DIR-1210 User Manual

WPS

82