D-Link AC1200 User Manual page 39

Section 4 - Configuration
Select Static IP if your IPv6 information is provided by your Internet Service
Provider (ISP). Choose Basic configuration or All Settings.
Basic
MAC address:
The default MAC address is set to the Internet port's physical interface
MAC address on the router. You can edit that address manually here.
Clone MAC
Toggle this switch to clone the MAC address of the device you are
address of your
using to access the web UI. Note that no two MAC address within the
NIC:
same subnet can be the same.
Restore Default
Click here to restore your router's default MAC address.
MAC Address:
IPv6 address: Specify the IPv6 address provided by your ISP.
Prefix: Specify the prefix provided by your ISP.
Gateway IPv6 Specify the default gateway address provided by your ISP.
address:
Primary IPv6 DNS Specify the primary DNS server IP address assigned by your ISP.
server:
Secondary IPv6 Specify the secondary DNS server IP address assigned by your ISP.
DNS server:
Click Apply when you are done.
D-Link DIR-1210 User Manual
Static IPv6
35