D-Link AC1200 User Manual page 38

Section 4 - Configuration
Miscellaneous
Firewall:
Toggle this switch to enable firewall functionality. This setting is
enabled by default.
RIP:
Toggle this switch to enable Routing Information Protocol (RIP). This
setting is disabled by default.
Ping:
Toggle this switch to enable WAN Ping. This setting is disabled by
default.
Isolate
Toggle this switch to enable connection isolation. This setting is
connection:
disabled by default.
Click Apply when you are done.
D-Link DIR-1210 User Manual
Dynamic IPv6 (cont)
34