Emerson Rosemount CX1100 Reference Manual page 24

In-situ oxygen transmitter

Hide thumbs Also See for Rosemount CX1100:

Table of Contents

Wire

F. 4-20 mA out

G. Power supply

H. Combustion sensor

Shield ground

Heater power terminates to underside of the sensor board.

K. Probe sensing connect shield to GND

L. S1 Dip switch is for factory use only and should be in the Off position.

AC power wires from power supply board to the underside of the sensor board are provided with

the sensor board.

Rosemount CX1100

Table of Contents