Emerson Rosemount CX1100 Reference Manual page 17

In-situ oxygen transmitter

Hide thumbs Also See for Rosemount CX1100:

Table of Contents

The Rosemount CX1100 Remote Transmitter is available in a panel mounting or wall/pipe

mounting configuration. Refer to

mounting details. You need a wrench and bolts to mount the transmitter.

Procedure

Reference Manual

Ensure all components are available to install the Rosemount CX1100 Remote

Transmitter.

Select a mounting location near or removed from the Rosemount CX1100 Probe.

Consider the temperature limitations of the Rosemount CX1100 Remote

Transmitter. Refer to product specifications when selecting the mounting location.

Mount at a height convenient for viewing and operating the interface.

Emerson recommends approximately 5 ft. (1.5 m).

The keypad window on the Rosemount CX1100 Remote Transmitter may have an

exterior protective membrane. Remove the protective membrane prior to use of the

Rosemount CX1100 Remote transmitter.

Failure to remove the protective membrane may cause the display to appear

distorted. The membrane may become difficult or impossible to remove after

extended use at elevated temperatures.

Figure 2-4

Figure 2-5

for the panel, wall, or pipe

Install

Table of Contents