Main Features - Infineon EVAL-M1-IM818-A User Manual

EVAL-M1-IM818-A User Manual
iMOTION™ Modular Application Design Kit

Main features

3 Main features
EVAL-M1-IM818-A is an evaluation board for motor drive applications based on a 3-phase IPM. Combined in a
kit with one of the available MADK control board options, it demonstrates Infineon's IPM technology for motor
drives. The kit demonstrates Infineon's IPM technology for motor drives.
Main features of CIPOS™ Maxi IPM IM818-MCC are:
• 1200 V TRENCHSTOP™ IGBT4
• Maximum blocking voltage VCES = 1200 V
• Maximum output current at 25°C case temperature IC = 16 A
• Rugged 1200 V SOI gate driver technology with stability against transient and negative voltage
• Allowable negative VS potential up to -11 V for signal transmission at VBS = 15 V
• Integrated bootstrap functionality
• Overcurrent shutdown
• Built-in NTC thermistor for temperature monitoring
• Under-voltage lockout at all channels
• Low side emitter pins accessible
• For all phase current monitoring (open emitter)
• Cross-conduction prevention
• All of 6 switches turn off during protection
• Programmable fault clear timing and enable input
• Lead-free terminal plating; RoHS compliant
The evaluation board characteristics are:
• Nominal input voltage 380 VAC
• Maximum 2.6 kW motor power output
• On board EMI filter
• Current sensing for each phase configured by default
• Sensing of DC-link voltage
• Measurement test-points compatible to standard oscilloscope probes
• PCB is 195 mm x 140 mm and has two layers with 35 µm copper each
• RoHS compliant
User Manual 5 <Revision 1.0>
<2018-11-15>