Figure 4-37 Fiber That Connects Zxsdr R8882 L268 And Ebbu; Figure 4-38 Installing Fibers - Zte ZXSDR R8882 L268 User Manual

ZXSDR R8882 L268 User Manual
Context
Figure 4-37

Figure 4-37 Fiber that connects ZXSDR R8882 L268 and eBBU

1. Outdoor sealing component
While connecting a eBBU to ZXSDR R8882 L268, make sure that the baseband RF fiber
interface (LC1/2) of ZXSDR R8882 L268 is connected to the optical interface connector of
eBBU.
Steps
1. Attach labels at both ends of the fiber.
2. Adjust the side of end A with the color mark and insert fiber interface, and screw down
the nuts, as shown in

Figure 4-38 Installing Fibers

1. Color mark
3. Connect end A of the fiber to the baseband-RF fiber interface (LC1/2) of ZXSDR R8882
L268. Connect end B of the fiber, which is a DLC connector, to the eBBU optical
connector.
4. Screw down the outdoor seal component at end A for waterproof.
– End of Steps –
SJ-20110104194923-001|2011-01-19(R1.0)
shows fiber connection between ZXSDR R8882 L268 and eBBU.
Figure 4-38.
4-30
ZTE Proprietary and Confidential