Mounting On Gantry; Figure 4-24 Zxsdr R8882 L268 Are Installed On Pole; Figure 4-25 Installing The Vertical Shaft And The Bottom Plate - Zte ZXSDR R8882 L268 User Manual

Figure 4-24 ZXSDR R8882 L268 Are Installed On Pole

– End of Steps –

4.5 Mounting On Gantry

Steps
1. Assemble the gantry.
a. Install the vertical shaft and the bottom plate by using the M5 x 16 screw, as shown
in

Figure 4-25 Installing The Vertical Shaft And The Bottom Plate

SJ-20110104194923-001|2011-01-19(R1.0)
Figure 4-25.
4-21
ZTE Proprietary and Confidential
Chapter 4 Product Installation