Figure 4-26 Fasten The Vertical Shaft And The Cover Plate; Figure 4-27 Installing The Slanted Rack - Zte ZXSDR R8882 L268 User Manual

ZXSDR R8882 L268 User Manual
b. Fasten the vertical shaft and the cover plate by using the M5 x 16 screw, as shown
in

Figure 4-26 Fasten The Vertical Shaft And The Cover Plate

c. Install the slanted rack by using the M5 x 16 screw, as shown in

Figure 4-27 Installing The Slanted Rack

2. Drill holes
a. According to the engineering design drawing, determine the installation position
of the gantry and mark installation holes by using the marking
shows the installation holes of the gantry.
SJ-20110104194923-001|2011-01-19(R1.0)
Figure 4-26.
4-22
ZTE Proprietary and Confidential
Figure 4-27.
pen.Figure 4-28