ZXSDR R8882 L268 User Manual
If the gantry is installed on the concrete floor, use the M10 x 100 expansion bolt, as
shown in
tapping screw, as shown in
Figure 4-30 Installing The Gantry On The Concrete Floor
Figure 4-31 Installing The Gantry On The Wooden Floor
4. Install the wall-mounting components on the gantry.
5. Install the ZXSDR R8882 L268 on the wall-mounting components. The device is
installed firmly on the gantry, as shown in
SJ-20110104194923-001|2011-01-19(R1.0)
Figure
4-30; if the gantry is installed on the wooden floor, use the M10 x 40
Figure
4-31.
Figure
4-32.
4-24
ZTE Proprietary and Confidential