Purpose; Delivery Set; Designation Key - Vents VUE 250 V mini A12 User Manual

PURPOSE

Due to the ability to save heating energy by means of energy recovery, the unit is an important element of energy-efficient premises.
The unit is a component part and is not designed for stand-alone operation.
The unit is designed to ensure continuous mechanical air exchange in houses, offices, hotels, cafés, conference halls, and other utility and public spaces
as well as to recover the heat energy contained in the air extracted from the premises to warm up the filtered stream of supply air.
The unit is designed for floor and suspended mounting.
The unit is rated for continuous operation.
Transported air must not contain any flammable or explosive mixtures, evaporation of chemicals, sticky substances, fibrous materials, coarse dust, soot
and oil particles or environments favourable for the formation of hazardous substances (toxic substances, dust, pathogenic germs).
THE UNIT SHOULD NOT BE OPERATED BY CHILDREN OR PERSONS WITH REDUCED PHYSICAL,
MENTAL, OR SENSORY CAPACITIES, OR THOSE WITHOUT THE APPROPRIATE TRAINING.
THE UNIT MUST BE INSTALLED AND CONNECTED ONLY BY PROPERLY QUALIFIED PERSONNEL
AFTER THE APPROPRIATE BRIEFING.
THE CHOICE OF UNIT INSTALLATION LOCATION MUST PREVENT UNAUTHORIZED ACCESS BY
UNATTENDED CHILDREN.

DELIVERY SET

Name
Air handling unit
User's manual
Control panel
Drain pipe
Installation kit
Packing box

DESIGNATION KEY

VUT
4
250 V A12
Control device
A1 – speed controller
A12 — sensor control panel
Spigot orientation
V – vertical
H – horizontal
Rated air flow [m /h]
3
Series of units
VUT – heat recovery air handling unit
VUE – energy recovery air handling unit
VUT/VUE 250 V/H mini A12/A1
Number
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
www.ventilation-system.com