Table Of Contents; Safety Requirements - Vents VUE 250 V mini A12 User Manual

CONTENTS
This user's manual consisting of the technical details, operating instructions and technical specification covers the installation and mounting of the VUT/
VUE 250 V/H mini A12/A1 heat recovery air handling unit (hereinafter referred to as «the unit»).

SAFETY REQUIREMENTS

Please read the user's manual carefully prior to installing and operating the unit.
All user's manual requirements as well as the provisions of all the applicable local and national construction, electrical, and technical norms and standards
must be observed when installing and operating the unit.
The warnings contained in the user's manual must be considered most seriously since they contain vital personal safety information.
Failure to follow the rules and safety precautions noted in this user's manual may result in an injury or unit damage. After a careful reading of the manual,
keep it for the entire service life of the unit.
While transferring the unit control, the user's manual must be turned over to the receiving operator.
Symbol legend:
• Disconnect the unit from power mains prior to
any installation operations.
• Do not lay the power cable of the unit in close
proximity to heating equipment.
2
Safety requirements .....................................................................................................................................................2
Purpose ................................................................................................................................................................................4
Delivery set ........................................................................................................................................................................4
Designation key ..............................................................................................................................................................4
Technical data ..................................................................................................................................................................5
Unit design and operating principle ..................................................................................................................6
Installation and set-up ................................................................................................................................................7
Connection to power mains ................................................................................................................................13
Unit control .....................................................................................................................................................................14
Technical maintenance ...........................................................................................................................................15
Troubleshooting ..........................................................................................................................................................17
Storage and transportation regulations .......................................................................................................17
Manufacturer's warranty.........................................................................................................................................18
Certificate of acceptance .......................................................................................................................................19
Seller information ........................................................................................................................................................19
Installation certificate ...............................................................................................................................................19
Warranty card ................................................................................................................................................................19
UNIT INSTALLATION AND OPERATION SAFETY PRECAUTIONS
CAUTION!
DO NOT!
• The unit must be grounded!
• While installing the unit, follow the safety
regulations specific to the use of electric tools.
VUT/VUE 250 V/H mini A12/A1
www.ventilation-system.com