Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Vents VKP mini
Summary of Contents for Vents VKP mini
- Page 1 USER’S MANUAL VKP mini InlIne centrIfugal fan...
-
Page 2: Table Of Contents
Warranty card ....................................19 this user’s manual is a main operating document intended for technical, maintenance, and operating staff. the manual contains information about purpose, technical details, operating principle, design, and installation of the VKP mini unit and all its modifications. -
Page 3: Safety Requirements
Do not use the unit in a hazardous or explosive environment containing spirits, gasoline, insecticides, etc. Do not close or block the intake or extract vents in order to ensure the efficient air flow. Do not sit on the unit and do not put objects on it. - Page 4 VKP mini this unit is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the unit by a person responsible for their safety.
-
Page 5: Purpose
PURPOSE THE UNIT SHOULD NOT BE OPERATED BY CHILDREN OR PERSONS WITH REDUCED PHYSICAL, MENTAL, OR SENSORY CAPACITIES, OR THOSE WITHOUT THE APPROPRIATE TRAINING. THE UNIT MUST BE INSTALLED AND CONNECTED ONLY BY PROPERLY QUALIFIED PERSONNEL AFTER THE APPROPRIATE BRIEFING. THE CHOICE OF UNIT INSTALLATION LOCATION MUST PREVENT UNAUTHORISED ACCESS BY UNATTENDED CHILDREN. -
Page 6: Technical Data
VKP mini TECHNICAL DATA the unit is designed for indoor application with the ambient temperature ranging from 0 °c up +45 °c °c and relative humidity up to 80 %. the unit is rated as a class I electrical appliance. Hazardous parts access and water ingress protection rating: IP22 for the assembled unit connected to the air ducts and IP44 for the unit motors. - Page 7 Maximum noise level rotation transported Voltage Maximum air at 3 m Model Speed Power [W] current [a] per minute [V/Hz] flow [m distance [rPM] temperature [dBa] [°c] 0.32 1400 VKP 100/100х2 mini 230/50 0.34 1800 2600 0.32 1400 VKP 100/100х4 mini 230/50 0.34 1800...
- Page 8 VKP mini Dimensions [mm] Weight Model [kg] ØD ØD1 VKP 80 mini VKP 100 mini 252 110 VKP 125 mini 124 124 270 141 VKP 125 S mini 124 124 270 141 VKP 125 mini Duo 124 124 303 152...
- Page 9 Dimensions [mm] Weight Model [kg] ØD ØD1 VKP 80/80х4 mini 297 253 VKP 100/80х4 mini 252 110 166 297 253 VKP 100/100х4 mini 252 110 166 297 253 VKP 125/100х4 252 133 191 370 321 VKP 80/80х5 mini 136 351 VKP 100/80х5 mini 252 110 166 351 VKP 100/100х5 mini...
-
Page 10: Unit Design And Operating Principle
6 inlets – 1 outlet the VKP mini fan consists of a metal casing with a turbine fixed on a casing flange. the impeller with forward curved blades is located inside of the scroll casing that ends up with the exhaust spigot. the terminal box incorporates an operating capacitor and a terminal block inside, and is attached to the casing end face. -
Page 11: Installation And Set-Up
INSTALLATION AND SET-UP BEFORE MOUNTING MAKE SURE THE CASING DOES NOT CONTAIN ANY FOREIGN OBJECTS (E.G. FOIL, PAPER). WHILE INSTALLING THE UNIT ENSURE CONVENIENT ACCESS FOR SUBSEQUENT MAINTENANCE AND REPAIR. the fan is suitable both for horizontal and vertical installation. to get the best performance of the unit and to minimize turbulence- induced air pressure losses, connect the straight air duct section to the spigots on both sides of the unit while installing. - Page 12 VKP mini Fan mounting sequence: • Make sure that the fan is disconnected from power mains. • Mark the positions for mounting the fixing brackets on the load-bearing surface. • Drill the holes and fix the bracket with matching fasteners (e.g. dowels), see fig. b.
-
Page 13: Connection To Power Mains
Mounting box cover Mounting box cover VKP mini — low speed VKP mini — medium speed VKP mini — high speed VKP mini — low and medium speed ~230 V, ~230 V, ~230 V, ~230 V, 50 Hz 50 Hz... -
Page 14: Technical Maintenance
VKP mini TECHNICAL MAINTENANCE DISCONNECT THE UNIT FROM POWER SUPPLY BEFORE ANY MAINTENANCE OPERATIONS! the technical maintenance includes periodic cleaning of the surfaces from accumulated dust and dirt. the impeller blades require thorough cleaning once in 6 months. Maintenance sequence: •... -
Page 15: Manufacturer's Warranty
MANUFACTURER’S WARRANTY the product is in compliance with eu norms and standards on low voltage guidelines and electromagnetic compatibility. We hereby declare that the product complies with the provisions of electromagnetic compatibility (eMc) Directive 2014/30/eu of the european Parliament and of the council, low Voltage Directive (lVD) 2014/35/eu of the european Parliament and of the council and ce-marking council Directive 93/68/eec. - Page 16 VKP mini www.ventilation-system.com...
- Page 17 www.ventilation-system.com...
- Page 18 VKP mini www.ventilation-system.com...
-
Page 19: Certificate Of Acceptance
CERTIFICATE OF ACCEPTANCE Unit Type Inline centrifugal fan Model Serial Number Manufacture Date Quality Inspector’s Stamp SELLER INFORMATION Seller Address Phone Number E-mail Purchase Date this is to certify acceptance of the complete unit delivery with the user’s manual. the warranty terms are acknowledged and accepted. - Page 20 V17en-06...