OV / OVK / VKf / OVP / OV1 / OVK1 / OV1 r / VKOM(z) / VKOM1(z) CONTENTS safety requirements ..................................2 Purpose ........................................ 4 Delivery set ......................................4 Designation key ....................................4 technical data ....................................5 Unit design and operating principle ..........................10 Mounting and set-up ..................................
Page 3
• Do not change the power cable length at your own discretion. • Do not bend the power cable. • Do not lay the power cable of the unit in • avoid damaging the power cable. close proximity to heating equipment. •...
OV / OVK / VKf / OVP / OV1 / OVK1 / OV1 r / VKOM(z) / VKOM1(z) PURPOSE THE UNIT SHOULD NOT BE OPERATED BY CHILDREN OR PERSONS WITH REDUCED PHYSICAL, MENTAL, OR SENSORY CAPACITIES, OR THOSE WITHOUT THE APPROPRIATE TRAINING.
TECHNICAL DATA the corrosive aggressiveness of the handled medium to carbon steels of ordinary quality must be equal to that of air at temperatures ranging from -25 °c to +40/60 °c. in addition to that the handled media must be free from dust and other hard impurities as well as sticky substances and fibrous materials.
Page 6
OV / OVK / VKf / OVP / OV1 / OVK1 / OV1 r / VKOM(z) / VKOM1(z) OV / OV / OV / OV / OV / OV / OV / OV / OV / OV / OVK / OVK / OVK / OVK /...
Page 7
Dimensions [mm] Weight Model [kg] Ø D Ø d OV 2E 200 OV 2E 250 / OV 2D 250 OV 4E 250 / OV 4D 250 OV 4E 300 / OV 4D 300 6.1 / 5.4 OV 4E 300 / OV 4D 300 5.0 / 5.4 OV 4E 350 / OV 4D 350 OV 4E 400 / OV 4D 400...
Page 8
OV / OVK / VKf / OVP / OV1 / OVK1 / OV1 r / VKOM(z) / VKOM1(z) Dimensions [mm] Model Weight [kg] Ø D Ø d OV1 150 OV1 200 OV1 250 OV1 315 OVK1 Dimensions [mm] Model Weight [kg] Ø...
Page 9
VKOM Dimensions [mm] Model Weight [kg] Ø D VKOM(z) 150 VKOM(z) 200 VKOM(z) 250 VKOM(z) 315 RM(z) VKOM RM(z) fans are equipped with (polymer-coated steel, galvanized steel) reducers for connection to 150 mm, 200 mm and 250 mm air ducts. the reducers are not included in the delivery set and must be ordered separately.
OV / OVK / VKf / OVP / OV1 / OVK1 / OV1 r / VKOM(z) / VKOM1(z) UNIT DESIGN AND OPERATING PRINCIPLE fans consist of a casing 1 with a square or a round flange with a grille fixed with bolts 4 and complete with an electric motor and impeller 5.
OVP, VKOM(z), VKOM1(z) fans the brackets 2 are attached to the casing with bolts 1. the electric motor with the impeller 4 is mounted on the bracket 3 inside the casing. the terminal box 5 mounted onto the fan casing provides connection to power mains. VKOM(z), VKOM1(z) OV1 R fan consists of a steel casing 1 with a square flange.
Page 12
OV / OVK / VKf / OVP / OV1 / OVK1 / OV1 r / VKOM(z) / VKOM1(z) OV fan installation OVK fan installation www.ventilation-system.com...
Page 13
OV1 and OVK1 fan installation www.ventilation-system.com...
Page 14
OV / OVK / VKf / OVP / OV1 / OVK1 / OV1 r / VKOM(z) / VKOM1(z) VKF fan installation the fans are installed into air ducts by means of connection flanges. the fan must be installed in such a way so that the direction of the arrow shown on the casing matches the direction of air flow in the system.
Page 15
VKOM(z) fan installation RM(z) the fans are installed into air duct by means of an reducer which enables joining different diameter ducts. Once done, the assembly VKOM(z) is secured with clamps. the power is supplied via terminal box on the fan casing. the delivery set includes mounting brackets for attaching the unit to the mounting surface.
OV / OVK / VKf / OVP / OV1 / OVK1 / OV1 r / VKOM(z) / VKOM1(z) OV1 R fan installation CONNECTION TO POWER MAINS DISCONNECT THE POWER SUPPLY PRIOR TO ANY OPERATIONS WITH THE UNIT. CONNECTION OF THE UNIT TO POWER MAINS IS ALLOWED BY A QUALIFIED ELECTRICIAN WITH A WORK PERMIT FOR THE ELECTRIC UNITS UP TO 1000 V AFTER CAREFUL READING OF THE PRESENT USER’S MANUAL.
Page 17
OV and OVK fan connection OV1 fan connection www.ventilation-system.com...
Page 18
OV / OVK / VKf / OVP / OV1 / OVK1 / OV1 r / VKOM(z) / VKOM1(z) VKF, VKOM(z), VKOM1(z) fan connection OVP fan connection www.ventilation-system.com...
TECHNICAL MAINTENANCE DISCONNECT THE UNIT FROM POWER SUPPLY BEFORE ANY MAINTENANCE OPERATIONS! all the operations specific to the technical maintenance must be performed upon disconnecting the fan from power mains. the technical maintenance includes periodic cleaning of the fan surfaces from dust and dirt. to dust off the metal parts of the fan, use a dry soft brush or a stream of compressed air.
TROUBLESHOOTING PROBLEM POSSIBLE REASONS TROUBLESHOOTING check the electrical connections and the power no electric power. switch status. the fan will not start on power-up. switch off the fan. Eliminate the cause for the impeller Motor jamming. clogging. switch the fan back on. automatic circuit breaker...
OV / OVK / VKf / OVP / OV1 / OVK1 / OV1 r / VKOM(z) / VKOM1(z) MANUFACTURER’S WARRANTY the product is in compliance with EU norms and standards on low voltage guidelines and electromagnetic compatibility. We hereby declare that the product complies with the provisions of Electromagnetic compatibility (EMc) Directive 2014/30/EU of the European Parliament and of the council, low Voltage Directive (lVD) 2014/35/EU of the European Parliament and of the council and cE-marking council Directive 93/68/EEc.
CERTIFICATE OF ACCEPTANCE Unit Type Electric axial fans Model OV / OVK / VKf / OVP / OV1 / OVK1 / OV1 r / VKOM / VKOM1 _______ Serial Number Manufacture Date Quality Inspector’s Stamp SELLER INFORMATION Seller Address Phone Number E-mail Purchase Date this is to certify acceptance of the complete unit delivery with the user’s manual.