Site Preparations; Site Selection - Dell EMC Z9264F-ON Setup Manual

The Z9264F-ON switch is suitable for installation as part of a common bond network
(CBN).
You can install the switch in:
• Network telecommunication facilities
• Data centers
• Other locations where the National Electric Code (NEC) applies
For more information about the Z9264F-ON switch specifications, see Specifications.
NOTE: Install the switch into a rack or cabinet before installing any optional
components.
Topics:
•

Site selection

• Cabinet placement
• Rack mounting
• Switch ground
• Fans and airflow
• Power
• Storing components
Site selection
Install your equipment in restricted access areas. A restricted access area is one where
service personnel can only gain access using a special tool, lock, key, or other means of
security. The authority responsible for the location controls access to the restricted area.
6

Site preparations

Site preparations
2