6
Press
to confirm.
Ok
7
Press
twice to return to the main menu.
Esc
Power off the reader.
8
Plug network plug into the network port
9
of reader and network point.
Turn on power and continue to configure
10
Security (see Security on page 68 for
more details).
In this page you will need to enter the values.
IP address
To enter the IP address of the terminal to suit
into the network environment.
Subnet mask
To enter the subnet mask of the network en-
vironment
.
Gateway
To enter the gateway of the network environ-
ment.
Netspeed
To select the network speed of the terminal,
10M, 100M or Auto. Recommended to use
Auto.
CONTENTS
61