I-Kiosk - FingerTec TA100C User Manual

i-Kiosk 100

Back of Reader Connector Port
1. ACCESS COnTrOL COnnECTiOn
To link reader with door lock systems and alarm system.
2. COmmuniCATiOn COnnECTiOn
TCP/IP Connection to provide TCP/IP communication to computer via
LAN cable.
RS232 Connection to provide RS232 communication to computer via
RS232 cable.
RS485 Single Connection to provide RS485 communication to computer
via RS485 cable.
RS485 Network Connection to provide RS485 communication to compu-
ter via RS485 network.
3. POwEr SuPPLy COnnECTiOn
To provide DC 12V to reader to operate.
pOWER SUppLy CONNECTION
TA100C Series
2
1
DC 5V power adapter
3
Connect DC 5V power adapter to the terminal.
1
Turn on the power supply.
2
Press the power button to switch on or shutdown the terminal.
3
Q2i/TA200 Plus
1 Connect DC 12V power supply to reader.
2 Turn on the power supply, the reader will start.
TA100C Terminal
i-Kiosk 100
+12V
GND
Connector Port Connector Pin
Power Button
DC12V
Power
Supply
59
CONTENTS