Final Gear Oil - Yamaha YXZ1000RSS Owner's Manual

7. Refill with the specified amount of the
recommended oil, and then install the
transmission oil filler cap.
Recommended oil:
See page 10-1.
Oil quantity:
1.50 L (1.59 US qt, 1.32 Imp.qt)
ECB03150
NOTICE
 Do not use oils with a diesel specifica-
tion of "CD" or oils of a higher quality
than specified. In addition, do not use
oils labeled "ENERGY CONSERVING II"
8
or higher.
 In order to prevent clutch slippage, do
not mix any chemical additives.
TIP
Be sure to wipe up any spilled oil.
8. Start the engine and drive the vehicle for
a few minutes to circulate the transmis-
sion oil.
9. Park the vehicle on a level surface, stop
the engine, and then check the transmis-
sion case for oil leakage.
TIP
If oil is leaking confirm that the transmission
oil filler cap is properly installed and then have
a Yamaha dealer check the transmission.
10. Check the transmission oil level and cor-
rect if necessary.
11. Install the panel.
EBU36050

Final gear oil

Check the oil level and change the final gear
oil at the intervals specified in the general
maintenance and lubrication chart.
Checking the final gear oil level
1. Park the vehicle on a level surface.
8-29