Yamaha YXZ1000RSS Owner's Manual page 35

The electrical circuit of the indicator light can
be checked by turning the key to "
the indicator light does not come on and then
go off, have a Yamaha dealer check the elec-
trical circuit.
TIP
If the launch system indicator light is flashing,
release the accelerator pedal and shift pad-
dles to reset the system. When the engine
speed returns to idle, the indicator light will go
off. You can now start off as normal in first
gear, or retry activating the launch system.
EBU36742
YCC-S system warning light " "
This warning light comes on when an error
has occurred or a malfunction has been de-
tected in the YCC-S system. Have a Yamaha
dealer check the YCC-S system.
The electrical circuit of the YCC-S system
" (on). If warning light can be checked by turning the
key to "
come on and then go off, have a Yamaha
dealer check the electrical circuit.
If the YCC-S system warning light flashes
when starting the engine, wait 3 seconds for
the light to stop flashing, and then retry start-
ing the engine. If an error in the YCC-S sys-
tem prevents the engine from starting, the
warning light will come and the display will in-
dicate an error code.
TIP
 YCC-S system error codes are visible only
when the engine is stopped.
 The engine may not start even though the
starter motor operates.
If the YCC-S system stops working correctly
while driving, the YCC-S warning light will
come on. If this occurs, it may be impossible
to shift out of the gear you are in; and the
4-7
" (on). If the warning light does not
4