Coolant - Yamaha YXZ1000RSS Owner's Manual

6. Check the oil filler bolt gasket for dam-
age, and replace it if necessary.
7. Install the differential gear oil filler bolt
and its gasket, and then tighten the bolt
to the specified torque.
Tightening torque:
Differential gear oil filler bolt:
23 N·m (2.3 kgf·m, 17 lb·ft)
8. Check for oil leakage. If oil leakage is
found, check for the cause.
EBU35110

Coolant

Check the coolant level prior to each time you
operate the vehicle, and have a Yamaha deal-
er change the coolant every two years.
Checking the coolant level
1. Park the vehicle on a level surface.
2. Remove the hood. (See page 8-10.)
3. Check the coolant level when the engine
is cold (the coolant level will vary with en-
gine temperature).
TIP
The coolant level in the coolant reservoir
should be between the minimum and maxi-
mum level marks.
2
3
1. Coolant reservoir cap
2. Maximum level mark
3. Minimum level mark
4. If the coolant level is at or below the mini-
mum level mark, remove the coolant res-
ervoir cap and add coolant to the
8-34
1
8