Yamaha YXZ1000RSS Owner's Manual page 98

4. While checking in front of you for obsta-
cles or anything that may cross your
path, release the brake pedal, and then
press the accelerator pedal to rev the en-
gine to the desired launch engine speed.
TIP
 The engine speed at launch must be be-
tween 5000–10000 r/min.
 If you release one shift paddle, or if a sys-
tem restriction is detected during standby
6
mode, the launch system indicator light will
begin to flash and the launch will be can-
celled.
 If the indicator light is flashing, release the
accelerator pedal and let the engine return
to idle speed. When the indicator light goes
off, you may start off normally or retry acti-
vating the launch system.
5. When ready, release both shift paddles at
the same time and further press the ac-
celerator pedal to launch the vehicle.
TIP
When the clutch has completely engaged, the
launch system and the launch system indica-
tor light will turn off.
ECB03430
NOTICE
Do not make consecutive launches with-
out allowing the clutch to cool down. Oth-
erwise, the clutch
damaged.
6-8
system may be