3. Tighten the locknut to the specified
torque. NOTICE: Always tighten the
locknut against the adjusting nut, and
then tighten it to the specified torque.
[ECB00082]
Tightening torque:
4
Locknut:
41 N·m (4.1 kgf·m, 30 lb·ft)
2
1
1. Special tool
2. Torque wrench
3. Crossover locknut
90˚
3
Rebound damping force
High speed rebound damping force
To increase the rebound damping force and
thereby harden the high speed rebound
damping, turn the rebound damping force
adjusting bolt in direction (a). To decrease the
rebound damping force and thereby soften
the high speed rebound damping, turn the
adjusting bolt in direction (b).
(b)
1
1. High speed rebound damping force adjusting bolt
4-48
(a)