Yamaha YXZ1000RSS Owner's Manual page 46

 The tachometer needle will start over at
7000 r/min after 12000 r/min.
1. Push the "RESET" button to select the
desired engine speed for deactivating the
indicator light.
2. Push the "MODE" button to confirm the
4
selected engine speed. The display exits
the shift light control mode and returns to
the standard multi-function display mo-
de.
Error code display
1
1. Error code display
2. YCC-S system error code display
3. Engine trouble warning light "
4. YCC-S system warning light "
This model is equipped with a self-diagnosis
device for various electrical circuits.
If a problem is detected in any of those cir-
cuits, the engine trouble warning light and/or
the YCC-S system warning light will come on
or flash, and the display will indicate an error
code.
4-18
2 3 4
"
"