Auxiliary Dc Jack - Yamaha YXZ1000RSS Owner's Manual

EBU35052

Auxiliary DC jack

The auxiliary DC jack is located at the left side
of the glove compartment. The auxiliary DC
jack can be used for suitable work lights, ra-
dios, etc. The auxiliary DC jack should only be
used when the engine is running and the
4
lights are turned off.
ECB02250
NOTICE
 Do not use accessories requiring more
than the stated maximum capacity. Do-
ing so may overload the circuit and cau-
se the fuse to blow.
 If accessories are used without the en-
gine running, the battery may discharge.
 Do not use an automotive cigarette light-
er or other accessories with a plug that
gets hot, because the jack can be dam-
aged.
1. Set the light switch to "
2. Turn the accessory off.
3. Start the engine. (See page 6-2.)
1. Auxiliary DC jack cap
2. Auxiliary DC jack
" (off).
4-52
4. Open the auxiliary DC jack cap, and then
insert the accessory power plug into the
jack.
1
Maximum rated capacity for the auxiliary DC
jack:
DC 12 V, 10 A (120 W)
5. Turn the accessory on.
6. When the auxiliary DC jack is not being
used, cover it with the cap.
2