Yamaha YXZ1000RSS Owner's Manual page 154

1. Final gear oil drain bolt
2. Gasket
4. Install the drain bolt and its new gasket,
and then tighten the bolt to the specified
8
torque.
Tightening torque:
Final gear oil drain bolt:
23 N·m (2.3 kgf·m, 17 lb·ft)
5. Refill with the recommended final gear oil
up to the brim of the filler hole. NOTICE:
Be sure no foreign material enters the
final gear case.
2
[ECB00422]
Recommended oil:
SAE 80 API GL-4 Hypoid gear oil
Oil quantity:
0.47 L (0.50 US qt, 0.41 Imp.qt)
TIP
 GL-4 is a quality and additive rating; GL-5
rated hypoid gear oils may also be used.
 If desired, an SAE 80W-90 hypoid gear oil
1
may be used instead.
6. Check the oil filler bolt gasket for dam-
age, and replace it if necessary.
7. Install the oil filler bolt and its gasket, and
then tighten the bolt to the specified
torque.
Tightening torque:
Final gear oil filler bolt:
23 N·m (2.3 kgf·m, 17 lb·ft)
8. Check for oil leakage. If oil leakage is
found, check for the cause.
8-31