Final Gear Oil - Yamaha WOLVERINE RMAX2 2024 Owner's Manual

Table of Contents

Advertisement

have your Yamaha dealer perform this main-
tenance. More frequent inspections are rec-
ommended if you often drive hard or operate
in severe conditions.
When worn, the V-belt should be replaced to
prevent
unintended
symptoms include:
 Initial acceleration is slow or maximum
speed is slow.
 Abnormal vibrations or unusual noises from
the CVT.
If any of the above signs occur, have the CVT
inspected and repaired if necessary.
EBU36055

Final gear oil

9
Check the oil level and change the final gear
oil at the intervals specified in the periodic
maintenance chart.
breakdowns.
Wear
ECB03590
NOTICE
When checking or changing the final gear
oil, make sure that no foreign material en-
ters the final gear case. If necessary, clean
the final gear oil filler bolt and surrounding
area.
Recommended oil:
YAMALUBE
SAE 80W-90 API GL-5 Hypoid gear oil
Oil quantity:
0.40 L (0.42 US qt, 0.35 Imp.qt)
Checking the final gear oil level
1. Park the vehicle on a level surface.
2. Remove the final gear oil filler bolt and its
gasket, and then check the oil level in the
final gear case. The oil level should be at
the brim of the filler hole.
9-25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Yx10erpar 2024Yx10erplr 2024Yx10erpsr 2024

Table of Contents