maximum level mark. NOTICE: If cool-
ant is not available, use distilled water
or soft tap water instead. Do not use
hard water or salt water since they are
harmful to the engine. If water has
been used instead of coolant, replace
it with coolant as soon as possible,
otherwise the cooling system will not
be protected against frost and corro-
sion. If water has been added to the
coolant, have a Yamaha dealer check
the antifreeze content of the coolant
as soon as possible, otherwise the ef-
fectiveness of the coolant will be re-
8
duced.
[ECB01012]
Coolant reservoir capacity
(up to the maximum level mark):
0.31 L (0.33 US qt, 0.28 Imp.qt)
5. Install the reservoir cap.
6. Install the hood when finished servicing
the vehicle.
TIP
The radiator fan automatically switches on
or off according to the temperature of the
coolant in the radiator.
If the engine overheats, see page 8-67 for
instructions.
EBU32400
Axle boots
Check the axle boots for holes or tears.
If any damage is found, have them replaced
by a Yamaha dealer.
1
1. Front axle boot
8-35
1