Wheel Installation - Yamaha YXZ1000RSS Owner's Manual

were designed to match the performance ca-
pabilities and to provide the best combination
of handling, braking, and comfort. It is best to
replace all four tires at the same time. If that is
not possible, you must replace the tires in
pairs (front or rear) with tires of the same size
and type as the originals. Never replace just
one tire.
EWB03390
WARNING
Installing improper tires on your Yamaha
YXZ1000R can affect handling and stabili-
ty. This can cause a loss of control.
The tires listed below have been approved by
Yamaha Motor Manufacturing Corporation of
America for this model.
Front tire:
Size:
27 x 9.00R-14NHS
Manufacturer/model:
MAXXIS/MU09
Rear tire:
Size:
27 x 11.00R-14NHS
Manufacturer/model:
MAXXIS/MU10
EBU33090

Wheel installation

1. Install the wheel and the nuts.
2. Lower the vehicle so that the wheel is on
the ground.
3. Tighten the wheel nuts in a crisscross
pattern to the specified torque.
EWB03400
WARNING
Do not reverse the rims on your Yamaha
YXZ1000R to widen the track width. In-
stalling wheels improperly increases the
risk of wheel failure and accidents.
8-56
8