Mitsubishi MELSEC-Q series User Manual page 150

7
ONLINE MODULE CHANGE
7
7.3 Online Module Change Procedure
- 23
7.3.4 When user range setting is used and initial setting was made with GX Configurator-DA (other system
(c) Click the [Close] button to close the System monitor screen.
(d) On the pass data screen of GX Configurator-DA, set the prerecorded values and
make a pass data write request. (Refer to Section 5.6.3.)
(e) Referring to (1), change the D/A conversion enable/disable setting of the used
channel to conversion enable.
(f) On the monitor/test screen of GX Configurator-DA, set a value in the Setting value
field of CH digital value of the used channel, and click the [Execute test] button.