Lockly SECURE Installation Manual page 13

STEP 6: INSTALLING THE LOCK (INTERIOR)
6.1
Insert positioning rods (Part V)
Interior
into the the holes to the left and
right of the square rod (Part C).
The holes are located at the 3
o'clock and 9 o'clock positions.
V
6.2
Part LK (Interior Mounting Plate)
will go against the interior side of
your door. Remove the paper
layer off of the 3M tape and match
the positioning rods on the bottom
of the plate to the corresponding
left and right holes.
Install the side with the black
plastic seal against the door.
(Mounting Plate)
Positioning rods slide through these holes.