Auto And Manual Test; Reset Of The Function - ProLights RA3000Profile User Manual

RA3000PROFILE
15
• Press the UP/DOWN button to select the mode (OFF - DIMMER1 - DIMMER2 - DIMMER3), then press the ENTER
button to confirm your choice.
• Press the LEFT button repeatedly to exit the menu and to save the changes made.
- Fans Mode - select this function to set the fan operating mode:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll through the menu, select Set Up, then press the ENTER button access
the next menu.
• Press the UP/DOWN button to select FIXTURE and press the ENTER button to proceed.
• Press the UP/DOWN button to scroll through the menu, then select Fans Mode and press the ENTER button
to confirm.
• Press the UP/DOWN button to select the Auto High mode, then press the ENTER button to confirm your
choice.
• Press the LEFT button repeatedly to exit the menu and to save the changes made.
- Theater Mode - Select this function for theatrical situations or in which you want less noise; the output of
the LED will be limited to limit the heating and the fans:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll through the menu, select the Set Up icon, then press the ENTER but-
ton to access the next menu.
• Press the UP/DOWN button to select Fixture and press the ENTER button to proceed.
• Press the UP/DOWN button to scroll through the menu, then select Theater Mode and press the ENTER
button to confirm.
• Press the UP/DOWN button to select the desired option (Auto / Silent / Off), then press the ENTER button to
confirm your choice.
• Press the LEFT button repeatedly to exit the menu and to save the changes made.
- Temperature - Select this function to set the unit of measurement of the temperature shown on the display:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll through the menu, select the Set Up icon, then press the ENTER but-
ton to access the next menu.
• Press the UP/DOWN button to select FIXTURE and press the ENTER button to proceed.
• Press the UP/DOWN button to scroll through the menu, then select Temperature °C/F and press the ENTER
button to confirm.
• Press the UP / DOWN button to select the Celsius / Fahrenheit measurement unit, then press the ENTER but-
ton to confirm the selection.
• Press the LEFT buttton repeatedly to exit the menu and to save the changes made.
3.13 AUTO E MANUAL TEST
Through these menus it is possible to test the functioning of all the functions of the moving head.
3.14 RESET OF THE FUNCTIONS
You can start a preset program to restore the selected function:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll through the menu, select the Advanced icon, then press the ENTER
button to enter the next menu.
• Press the UP/DOWN button to select Reset and press the ENTER button to access the next menu.
• Press the UP/DOWN button to scroll through the menu, then select the function you want to reset be-
tween those.
• Press the ENTER button to confirm the selection and wait for the selected function to be restored.
• Press the LEFT button repeatedly to exit the menu and to save the changes made.