Table of Contents
Advertisement
R I S C C P U M o d u l e
CN11
CN12
CN13
CN14
CN15
CN16
CN17
CN18
CN19
CN20
CN21
CN23
CN25
CN26
CN27
CN28
Note: CN2 is parallel interface, which supports two modes:
SYNC mode: In this mode, the image-sensor module provides horizontal and
vertical synchronization signals to the parallel interface, along with the pixel
clock. This mode works with 8-, 10-, 11-, and 12-bit data (above 10-bit RAW
data, the processing pipe cannot be used; data must
be transferred to memory). SYNC mode supports progressive and interlaced
image-sensor modules.
ITU mode: In this mode, the image-sensor module provides an ITU-R BT
656-compatible data stream. The horizontal and vertical synchronization
signals are not provided to the interface. Instead, the data stream embeds
start-of-active (SAV) and end-of-active video (EAV) synchronization code. This
mode works in 8- and 10-bit configurations. It supports only progressive
image-sensor modules.
Chapter 2 Quick Installation Guide
COM2 RS232/422/485 Connector
Battery Connector
Micro SD Connector
JTAG Connector
Touch Panel Connector
Backup Battery Connector
Mini Card 2 Connector
TTL LCD Connector
LVDS LCD Connector
LCD Inverter Connector
Ethernet RJ-45 Connector
USB Client Connector
COM1 RS-232 Connector
D-SUB VGA Connector
SD Card Connector
Proprietary Expansion 124-Pin Slot
2 - 8
G E N E - 1 3 5 0
Advertisement
Table of Contents
