Characteristics - ADF Web HD67021-B2-20 User Manual

Industrial Electronic Devices

CHARACTERISTICS:

The HD67021 and HD67022 series are M-Bus / Serial converters with the following features:
Electrical isolation between Serial / M-Bus, Serial / Power Supply, M-Bus / Power Supply;
Baud Rate and Parity changeable with software;
Mountable on 35mm DIN Rail;
Power Supply 15...21V AC or 18...35V DC;
Temperature range -40°C to 70°C.
At the Gateway can be connected up to 250 standard M-Bus devices. This number depends of the code expressed by the xxx number:
HD67021-B2-20 and HD67022-B2-20 support up to 20 M-Bus devices;
HD67021-B2-40 and HD67022-B2-40 support up to 40 M-Bus devices;
HD67021-B2-80 and HD67022-B2-80 support up to 80 M-Bus devices;
HD67021-B2-160 and HD67022-B2-160 support up to 160 M-Bus devices;
HD67021-B2-250 and HD67022-B2-250 support up to 250 M-Bus devices.
In the case of HD67021-B2-250 and HD67022-B2-250 the device must be mounted on 35mm DIN rail which is horizontally mounted
on a wall or cabinet back-plate. This unit have a fan in the top of the enclosure. To avoid obstructions to the airflow around the unit it is
recommended to not cover the paths of air. Take care to not cover the fan. It is recommended to put the device into a ventilated cabinet.
CONFIGURATION:
You need Compositor SW67021 software on your PC in order to perform the following:
Define the communication parameters of the M-Bus;
Define the communication parameters of the RS232/RS485;
Update Firmware.
ADFweb.com Srl – IT31010 – Mareno – Treviso
User Manual M-Bus / RS232 / RS485
Document code: MN67021_ENG Revision 2.100
INFO: www.adfweb.com Phone +39.0438.30.91.31
Page 6 of 25