Initial Set-Up And Operation; Operator's Safety Precautions; Operating Controls And Indicators - Stoelting E122 Operator's Manual

3.1 OPERATOR'S SAFETY PRECAUTIONS

SAFE OPERATION IS NO ACCIDENT; observe these
rules:
A. Know the machine. Read and understand the
Operating Instructions.
B. Notice all warning labels on the machine.
C. Wear proper clothing. Avoid loose fi tting garments,
and remove watches, rings or jewelry that could
cause a serious accident.
D. Maintain a clean work area. Avoid accidents by
cleaning up the area and keeping it clean.
E. Stay alert at all times. Know which switch, push
button or control you are about to use and what
effect it is going to have.
F. Disconnect electrical cord for maintenance. Never
attempt to repair or perform maintenance on the
machine until the main electrical power has been
disconnected.
G. Do not operate under unsafe operating conditions.
Never operate the machine if unusual or excessive
noise or vibration occurs.
Consistency
Adjustment
Owner's Manual #513667
SECTION 3

INITIAL SET-UP AND OPERATION

Screw
Figure 3-1 F122 Controls

3.2 OPERATING CONTROLS AND INDICATORS

Before operating the machine, it is required that the opera-
tor know the function of each operating control. Refer to
Figure 3-1 for the location of the operating controls on the
machine. For information regarding error codes displayed
on the control panel, refer to the troubleshooting section
of this manual.
WARNING
High voltage will shock, burn or cause death. Make
sure the display shows the freezing cylinders and
pump are off. If they are not, press the On/Off button
and Pump button to turn them off prior to disas-
sembling for cleaning or servicing. Do not operate
machine with panels removed.
IntelliTec2
Control
9 E122 & F122 Model Machines