Reset - wtw pH/Oxi 340i Operating Manual

Operation
Measurement
parameters
Configuration
parameters
58
4.9

Reset

You can reset (initialize) the measurement parameters and the config-
uration parameters separately from one another.
The following measuring parameters are reset to the delivery status:
pH
Measuring mode
Slope
Asymmetry
Manual temperature input
Oxi
Measuring mode
Relative slope
Salinity (value)
Salinity (function)
Note
The calibration data gets lost when the measuring parameters are re-
set. Recalibrate after performing a reset.
The following configuration parameters (InI) are reset to the delivery
status:
Baud rate
Display during the
pH calibration
Interval 1
(automatic save)
Interval 2
(for data transmission)
pH
-59.16 mV/pH
0 mV
25 °C
D. O. concentration
1.00
0.0
off
4800
Buffer nominal value
OFF
OFF
pH/Oxi 340i