Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Digital Check Manuals
  4. Scanner
  5. SmartSource Expert Micro Elite
  6. Quick start manual

Digital Check SmartSource Expert Micro Elite Quick Start Manual

Simpleswitch connectivity
Hide thumbs Also See for SmartSource Expert Micro Elite:
1
2

Advertisement

Quick Links

Download this manual
SmartSource
SimpleSwitch Connectivity
The SimpleSwitch Connectivity feature provides a convenient way to perform initial set up of the
connection mode on your scanner by following the steps below. Once configured, the scanner will remain
in that mode unless reconfigured using the instructions on the back of this sheet.
ETHERNET MODE
1
Ethernet Cable
(ETHERNET)
Plug in power supply and a
live Ethernet cable.
RNDIS MODE (Ethernet-over-USB)
x
1
Power on scanner with NO
Ethernet or USB cables connected.
20241118
Expert Micro Elite
®
2
Power on the scanner.
2
Wait for the indicator light on
the Smart Button to turn red.
Plug in the USB cable.
TRADITIONAL USB MODE
1
Plug in power supply and
the USB cable.
3
Press and hold the Smart Button for
about :10 seconds until you hear two
audible "chirps". After the second
"chirp", release the button.
2
Power on the scanner.
:10
USB Cable
(RNDIS Mode)
Rev C 82276477-000

Advertisement

loading
Need help?

Need help?

Do you have a question about the SmartSource Expert Micro Elite and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Digital Check SmartSource Expert Micro Elite

Summary of Contents for Digital Check SmartSource Expert Micro Elite

  • Page 1 SmartSource Expert Micro Elite ® SimpleSwitch Connectivity The SimpleSwitch Connectivity feature provides a convenient way to perform initial set up of the connection mode on your scanner by following the steps below. Once configured, the scanner will remain in that mode unless reconfigured using the instructions on the back of this sheet. ETHERNET MODE TRADITIONAL USB MODE Ethernet Cable...
  • Page 2 SmartSource Expert Micro Elite ® SimpleSwitch Connectivity If you need to change your scanner from Network mode (either Ethernet or RNDIS) to traditional USB mode, or traditional USB mode to Network mode, please follow these steps. Start with your scanner powered ON with USB and Ethernet cables unplugged from scanner.