Table of Contents
Advertisement
SmartSource Elite Series - Installation & Operations Guide
Installing the Inkjet Cartridge (Professional Elite and Ultraviolet Elite Only)
1. Lift off the endorser cover. The endorser housing is visible.
2. The housing may have packing tape on it to hold it closed during shipping. Remove this tape
carefully.
3. Open the housing by pressing on the blue latch as shown. The cover of the housing will pop open.
Press latch like
this...
...and cover will
open
4. Open the sealed package containing the inkjet cartridge and remove the sealing tape as shown on
the cartridge.
5. Insert the cartridge into the housing as shown. There is no need to press down on the cartridge.
6. Once the cartridge is in place, press the top of the housing down until the housing latches shut.
January 2017
Insert cartridge
like this...
8227 4907-003
...then press down
cover to close.
Page 11 of 32
Hide quick links:
Advertisement
Table of Contents
