1 Press the
Channel 1
ground level
Channel 2
ground level
To setup the Analog channels
1
key in the Vertical section (Analog section on mixed-signal
oscilloscopes) of the front panel to display the channel 1 menu.
Channel,
Volts/div
Channel
Bandwidth
coupling
limit
Pressing an analog channel key turns the display of the channel on or off. The
channel is displayed when the key is illuminated.
Turning channels off
If more than one channel is turned on (channel keys are illuminated), you must be
viewing the menu for a channel before you can turn it off. For example, if channel 1
and channel 2 are turned on and the menu for channel 2 is being displayed, to turn
channel 1 off, press 1 to display channel 1 menu, then press 1 again to turn channel
1 off.
MegaZoom Concepts and Oscilloscope Operation
To setup the Analog channels
Channel
Invert
vernier
channel
Trigger
Trigger level
source
or threshold
Probe attenuation
factor
4-7