Publication Number - Agilent Technologies 54622A User Manual

Product Warranty
This Agilent Technologies
product has a warranty
against defects in material
and workmanship for a period
of three years from date of
shipment. During the
warranty period, Agilent
Technologies will, at its
option, either repair or
replace products that prove to
be defective. For warranty
service or repair, this product
must be returned to a service
facility designated by Agilent
Technologies. For products
returned to Agilent
Technologies for warranty
service, the Buyer shall
prepay shipping charges to
Agilent Technologies and
Agilent Technologies shall pay
shipping charges to return the
product to the Buyer.
However, the Buyer shall pay
all shipping charges, duties,
and taxes for products
returned to Agilent
Technologies from another
country. Agilent Technologies
warrants that its software and
firmware designated by
Agilent Technologies for use
with an instrument will
execute its programming
instructions when properly
installed on that instrument.
Agilent Technologies does not
warrant that the operation of
the instrument software, or
firmware will be
uninterrupted or error free.
Limitation of Warranty
The foregoing warranty shall
not apply to defects resulting
from improper or inadequate
maintenance by the Buyer,
Buyer- supplied software or
interfacing, unauthorized
modification or misuse,
operation outside of the
environmental specifications
for the product, or improper
site preparation or
maintenance.
No other warranty is
expressed or implied.
Agilent Technologies
specifically disclaims the
implied warranties of
merchantability or fitness
for a particular purpose.
Exclusive Remedies
The remedies provided herein
are the buyer's sole and
exclusive remedies. Agilent
Technologies shall not be
liable for any direct, indirect,
special, incidental, or
consequential damages,
whether based on contract,
tort, or any other legal theory.
Assistance
Product maintenance
agreements and other
customer assistance
agreements are available for
Agilent Technologies
products. For any assistance,
contact your nearest Agilent
Technologies Sales Office.
Certification
Agilent Technologies certifies
that this product met its
published specifications at the
time of shipment from the
factory. Agilent Technologies
further certifies that its
calibration measurements are
traceable to the United States
National Institute of
Standards and Technology, to
the extent allowed by the
Institute's calibration facility,
and to the calibration facilities
of other International
Standards Organization
members.
About this edition
This is the Agilent 54621A/
22A/24A Oscillosocpes and
Agilent 54621D/22D Mixed-
Signal Oscilloscopes User's
Guide.

Publication number

54622-97014, August 2000
Print history is as follows:
54622-97014, August 2000
54622-97002, March 2000
Printed in USA.
New editions are complete
revisions of the manual. Many
product updates do not
require manual changes; and,
conversely, manual
corrections may be done
without accompanying
product changes. Therefore,
do not expect a one-to-one
correspondence between
product updates and manual
updates.