To Display And Rearrange The Digital Channels - Agilent Technologies 54622A User Manual

To display and rearrange the digital channels

1 Press the
channels on or off.
Digital channels are displayed when the D15 Thru D8 or D7 Thru D0 key is
illuminated.
2 Turn the Digital Channel Select knob to select a digital channel.
As you turn the Channel Select knob, the selected channel number is
highlighted on the left side of the display.
3 Turn the Digital position knob to reposition the selected channel on the
display.
If two or more channels are displayed at the same position, the channel number
will be shown as D* on the left side of the display. When you use the Channel
Select knob to select this channel, a pop up will appear showing the list of
overlaid channels. Continue turning the Channel Select knob until the desired
channel within the pop up is selected. You can also use this feature to bus
several signals together on the display.
List of stacked
channels
MegaZoom Concepts and Oscilloscope Operation
D15 Thru D8 key or D7 Thru D0
To display and rearrange the digital channels
key to turn the display of the digital
4- 33