To Clear The Waveform Display - Agilent Technologies 54622A User Manual

MegaZoom Concepts and Oscilloscope Operation

To clear the waveform display

To clear the waveform display
• Press the Display key, then press the
Acquisition memory and the current display are immediately erased. If the
instrument is running, however, and the oscilloscope finds a trigger condition,
the display will be quickly updated after the erasure.
Summary of oscilloscope Run Control and infinite persistence keys
Run/Stop illuminated green—acquires data and displays the most recent trace.
Run/Stop illuminated red—freezes the display.
Single—acquires a single trace.
Persist—infinite persistence acquires data, displaying the most recent trace in
full-bright and previously acquired waveforms in half-bright.
Clear Display—clears the display.
4- 30
Clear Display softkey.