To Reset The Label Library To The Factory Default - Agilent Technologies 54622A User Manual

1 Press the
C A U T I O N
2 Press the
MegaZoom Concepts and Oscilloscope Operation

To reset the label library to the factory default

To reset the label library to the factory default
Utility key, then press the
Pressing the Default Library softkey will remove all user-defined labels from
the library and set the labels back to the factory default. Once deleted, these
user-defined labels cannot be recovered.
Default Library
This will delete all user-defined labels from the library and set the labels in the
library back to the factory default. However, this does not default the labels
currently assigned to the channels (those labels that appear in the waveform
area).
Defaulting labels without erasing the default library.
Selecting Default Setup in the Save/Recall menu will set all channel labels back to
the default labels (1, 2, D15-D0), but does not erase the list of user-defined labels in
the Library.
4- 46
Options softkey.
softkey.