Application Operation; Equipment Management - Delfield Specification Line GADTR1P-SH Original Instructions Service Manual

Operation

Application Operation

Set Up A Site
1. Select + Add Site.
2. Fill in all site information. All fields are required.
₋ Site ID (Max 30 Characters)
₋ Site Name (Max 20 Characters)
₋ Site Manager Name (Max 20 Characters)
₋ Site Email ID (Max 50 Characters)
₋ Site Address (Max 50 Characters)
₋ Country (From a Menu)
₋ State (From a Menu
₋ City (Max 20 Characters)
₋ Postal Code (Max 10 Characters)
3. Select Choose Site Location to
put a pin on the map.
4. Select Submit.
5. The new site will be added to the home page.
Edit Or Delete Site
1. Select the menu icon next to
the site.
2. Edit and Delete Site are
available actions.
3. Edit will bring up the site
information page.
4. Delete will require confirmation.
Set Up Equipment
1. Select the menu icon next to the site.
2. Select View Equipments.
3. Select + Add.
4. Fill in all equipment information. All fields are required.
NOTE: Serial number entered must match equipment.
₋ Equipment Serial Number (Max 30 Characters)
₋ Equipment Name (Max 20 Characters)
₋ Equipment Type (From a Menu)
₋ Equipment Model (From a Menu)
5. Select Submit.
6. The new equipment will be connected to the site.
32
Edit Or Delete Equipment
1. Select the menu icon next to
the equipment.
2. Edit and Delete Equipment are
available actions.
3. Edit will bring up the
equipment information page.
4. Delete will require
confirmation.

EQUIPMENT MANAGEMENT

View Equipment Statistics
Tabs include:
• Summary tab includes the following statistics:
₋ Cavity1 Temp Max/Min
₋ Cavity2 Temp Max/Min
₋ Ambient Temp Max/Min
₋ Energy Used
₋ Network
₋ Signal Strength
• Latest Temperature Information
• Set Point Vs Cavity Vs Ambient Temperature
• Condenser Inlet Vs Outlet Temperature
• Evaporator Inlet Vs Outlet Temperature
• Energy Usage
Change the date range by clicking the calendar icon.
If the site has multiple pieces of equipment you can switch to
the other equipment from the equipment menu.
View Error Statistics
1. Select the menu icon next to the equipment.
2. View Error Statistics will bring up a list.
₋ Change to a graph view by selecting the graph
icon in the top right corner.
₋ Change the date range by clicking the calendar
icon.
₋ If the site has multiple pieces of equipment
you can switch to the other equipment from the
equipment menu.
Section 3
Part Number GA_SM 08/18