Alarm Management; Network Connection - Delfield Specification Line GADTR1P-SH Original Instructions Service Manual

Operation

Alarm Management

Alarm Management
Audible Alarm
Back
Configuration Screen\Alarm Management
• Access to this page requires the manager password.
• Selecting this Icon switches the audible alarm between
Off and On. On is the factory setting.
Audible Alarm is Off
Audible Alarm is On
28
ON
ON

Network Connection

!
Ethernet:
WiFi:
Back
Configuration Screen\Network Connection
• Ethernet: will display local area network name and icon if
it is connected.
• WiFi: will display the WiFi network name and signal
strength if it is connected.
• Ethernet and WiFi both offer access to a IP Address Setup
screen. Select the cog icon.
• Manage network connection by selecting Set Up
Connection.
Back
Configuration Screen\Network Connection
• Screen will list up to eight networks, their name, type of
security, and signal strength using an icon.
• Use the scroll bar on the right of the screen to see
additional networks.
Connected to:
10.214.25.62
SSID: net_name
Connection Setup
Manage Networks
WBT_Enterprise
[WPA-PSK-TKIP=CCMP][WPA2-PSK-TKIP+CCMP][ESS]
Freds_WiFi
[WPA-PSK-CCMP][WPA2-PSK-CCMP][WPS][ESS]
WBT_Guest
[WPA-PSK-TKIP=CCMP][WPA2-PSK-TKIP+CCMP][ESS]
Freds_WiFi
[WPA-PSK-TKIP=CCMP][WPA2-PSK-TKIP+CCMP][ESS]
Add a Network
\Set Up Connection
Part Number GA_SM 08/18
Section 3
!
!