Amana ATX 518 VW Service Manual page 61

Kit Instructions
C. Repeat Step 8 to install trim on each of the three
remaining sides of the freezer panel.
9. Install decorator panel on front of freezer door.
A. To prevent scratching freezer door when sliding
panel into trim slots, cover outside edges of rear panel
surface with masking tape and put three (3) evenly-
spaced strips of masking tape across the rear side of
the decorator panel.
B. Slide decorator panel into place.
IMPORTANT: Permanent-type, double-sided adhesive
tape is attached to all trim pieces for easy
installation. Before peeling away paper backing
from tape, check the fit of the trim pieces and be
sure you understand how to install each one.
Damage to trim pieces could result if adjustment
or removal is attempted after installation.
10. Attach handle (left) side trim to freezer door.
A. Remove paper backing from alternating adhe-
sive tape.
B. Press handle (left) side trim into place over the
edges of trim on top and bottom of door.
61 RS5280001 Rev. 0