Amana ATX 518 VW Service Manual page 55

Kit Instructions
DT17, DT18 and DT19 Top Freezer Refrigerator Trim Kits
Installation Instructions
Introduction
RECOGNIZE THIS SYMBOL AS A
SAFETY PRECAUTION
Caution
To avoid personal injury and property damage,
observe all safety instructions.
Caution
To avoid personal injury, protect hands and arms. Trim
pieces may have sharp edges.
Included in this kit are the trim necessary to install 1/4
inch (6 millimeters) thick decorator door panels. Read
entire manual before installing panels. Confirm all parts
listed are included in kit. If parts are missing, contact
source from whom kit was purchased.
• Mechanical experience is required to install trim kit.
• If unable to solve a problem during installation,
contact source from whom kit was purchased.
Decorator Panel Dimensions
Listed below are required height x width dimensions for
decorator panels. Panels are not supplied with this kit
and can be purchased locally.
• If panels are less than 1/4 inch (6 millimeters) thick,
spacers are required behind panels.
• If panels are more than 1/4 inch (6 millimeters) thick,
panel edges must be routed to reduce thickness to
1/4 inch (6 millimeters).
Caution
To avoid personal injury or property damage,
refrigerator panels should not weigh more than 30
pounds (14 kilograms) and freezer panels should not
weigh more than 15 pounds (7 kilograms).
DT17 and DT19 Kits
Refrigerator Door
Freezer Door
DT18 Kit
Refrigerator Door
Freezer Door
55
32 17/32" x 42"
826 mm x 1067 mm
32 17/32" x 19 7/8"
826 mm x 505 mm
35 17/32" x 42 1/2"
902 mm x 1079 mm
35 17/32" x 20 7/16"
902 mm x 519 mm
RS5280001 Rev. 0